LSM check box P7100 UHF

[TDR-94]

Any reason why a P7100 UHF would not lock onto a CC, on a multisite system,if the Linear Simulcast check box was selected? It should just take longer for the radio to lock onto the CC,correct? Is LSM supported by the P7100 UHF/VHF models?

I never have this issue on a P7100 800mhz,even if the system isn't using LSM,and the check box is selected.

 

[DisasterGuy]

Any reason why a P7100 UHF would not lock onto a CC, on a multisite system,if the Linear Simulcast check box was selected? It should just take longer for the radio to lock onto the CC,correct? Is LSM supported by the P7100 UHF/VHF models?

I never have this issue on a P7100 800mhz,even if the system isn't using LSM,and the check box is selected.

Not sure about UHF but I have seen a 800MHz P5100 have issues with LSM checked depending on code version.

Sent from my Pixel using Tapatalk

 

[TDR-94]

This and my 800mhz both have J2R18H09 and F8R06N05 in them. I believe you have to have J2R18H09 in the radio for LSM to work.

 

[TDR-94]

The site I was monitoring was multicast not LSM. I'm just wondering why the radio stops receiving the CC all together,if the check box is checked,instead of there just being an additional delay.

 

[kb4cvn]

I troubleshot a P5100 for a local chap for the regional P-25 simulcast system here.

I had to put J2R18M02 & F8R06T03 into them to get them working, with the LINEAR SIMULCAST BOX unchecked. (Checked, it did not work at all.)

 

[kb4cvn]

Here is the SRN for the J2R18M02 firmware.

 

[TDR-94]

Well,I don't have that version of DSP and firmware to try out.