With a fellow co-worker on our OEM Communications team we are trying to set up this repeater and need some assistance with CPS in programing it.
Though I have been in radio communications for a long time, It just could be my understanding of terms and newness in understanding DMR. Now I have done a lot reading and have gone through the CPS help file a number of times but I need some clarification and direction if possible.
1. This is a non amateur radio repeater set up. This is being set up on a licensed UHF IG frequency. Therefore Amateur DMR Contacts do not apply.
(I.E.from DMR-MARC etc...)
2. DMR Contact = DMR Talkgroup they are synonymous - correct?
3. It seems to me according to CPS, One has to program each channel separately with the correct CC # and Time Slot (TS) with each corresponding TG/Contact.
Example:
Ch 1 RX 465.5750 TX 460.5750 CC 9 TS 1 TG/Contact 301201
Ch 2 RX 465.5750 TX 460.5750 CC 9 TS 1 TG/Contact 301303
Ch 3 RX 465.5750 TX 460.5750 CC 7 TS 2 TG/Contact 302750
4. The channels then must also be listed in the RX Scan List. Thus the repeater will scan the RX Scan list repeat and pass traffic when the proper TG/Contact access the correct Ch in the repeater.
5. So if I have 7 TGs I need to program 7 Channels?
Or am I missing something?
If any one has experience in Hytera RD 982 DMR UHF Repeater Programming you can also PM me directly.
Thanks in advance for any assistance.
Though I have been in radio communications for a long time, It just could be my understanding of terms and newness in understanding DMR. Now I have done a lot reading and have gone through the CPS help file a number of times but I need some clarification and direction if possible.
1. This is a non amateur radio repeater set up. This is being set up on a licensed UHF IG frequency. Therefore Amateur DMR Contacts do not apply.
(I.E.from DMR-MARC etc...)
2. DMR Contact = DMR Talkgroup they are synonymous - correct?
3. It seems to me according to CPS, One has to program each channel separately with the correct CC # and Time Slot (TS) with each corresponding TG/Contact.
Example:
Ch 1 RX 465.5750 TX 460.5750 CC 9 TS 1 TG/Contact 301201
Ch 2 RX 465.5750 TX 460.5750 CC 9 TS 1 TG/Contact 301303
Ch 3 RX 465.5750 TX 460.5750 CC 7 TS 2 TG/Contact 302750
4. The channels then must also be listed in the RX Scan List. Thus the repeater will scan the RX Scan list repeat and pass traffic when the proper TG/Contact access the correct Ch in the repeater.
5. So if I have 7 TGs I need to program 7 Channels?
Or am I missing something?
If any one has experience in Hytera RD 982 DMR UHF Repeater Programming you can also PM me directly.
Thanks in advance for any assistance.