Ingham County Fire TRS

Status
Not open for further replies.
Joined
Mar 20, 2005
Messages
2
I was able to find the frequencies for the new Ingham County public safety radios system on the site, What I am missing are the rural fire id's.

I have a Uniden 796D and figure it needs to be programmed in a similar fashion to the state police system.

Any help is greatly appreciated.
 
Last edited:

rdale

Completely Banned for the Greater Good
Premium Subscriber
Joined
Feb 3, 2001
Messages
11,380
Location
Lansing, MI
I don't understand your question... If you scroll down, you'll see the entire list of fire talkgroups. The only unknowns for now are some of the police side and East Lansing / Meridiain since they aren't online yet.
 
Joined
Mar 20, 2005
Messages
2
Most of the rural talk grous are zeroed out,
Rural Public Safety Talkgroups []

AFS Mode Display Description
00-000 A LG TAC Lansing Twp PD TAC
00-000 A SPEVENT1 Stockbridge Event 1
00-000 A SP TAC Stockbridge Tac
00-000 A WLEVENT2 Williamston Event 2
00-000 A WLEVENT1 Williamston Event 1
00-000 A MAEVENT2 Mason Event 2
00-000 A MAEVENT1 Mason Event 1
00-000 A LSEVENT2 Leslie Event 1
00-000 A LSEVENT1 Leslie Event 1
00-000 A LS TAC Leslie Tac
00-000 A WL TAC Williamston TAC
00-000 A MA TAC Mason Tac
00-000 A LG DB Lansing Twp Detective
00-000 A SPEVENT2 Stockbridge Event 2


They are online with the system and running on full time. The dispatch has also not been going out on the old VHF channel.
 

rdale

Completely Banned for the Greater Good
Premium Subscriber
Joined
Feb 3, 2001
Messages
11,380
Location
Lansing, MI
Those are primarily for police and/or police-fire use, but since police units are not on the system we don't have talkgroups for them. All fire ops that are used are in the list.

All dispatches for out-county fire are on FIRE MAIN and simulcast on 460.600MHz in conventional mode for pagers.
 
Status
Not open for further replies.
Top