• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Open Scanned Channel on Tone Reveive

Status
Not open for further replies.

KCOEM9108

Newbie
Premium Subscriber
Joined
Aug 3, 2011
Messages
3
Location
Elgin, IL
So this is what I am looking to do...

There are 2 widely used freqs that I scan but get tired of having to use nuisance delete to kill the trivial chatter, I only want to hear the dispatch with QC-II tones.

I have the tone settings that dispatch uses when giving out the call, how do I set this up so the channel only opens to voice when the radio detects the QC-II tones?

Looking to do this with both a HT1250LS and a CDM1550LS+, have CPS R06.12.02 and R06.12.04

Any guidance would be helpful.
 

wardaddy

Member
Joined
Sep 28, 2011
Messages
109
Under signalling, set up a QC-II system to your specifications. Open your conventional personality and go to signalling. Set the Rx system to the QC-II system you set up and set signalling squelch to "And".

Of course, you can only have one QC-II system per conventional personality.
 
Status
Not open for further replies.
Top