• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Impres Charger for Lithium Ion Battery

Status
Not open for further replies.

Mpanella

Member
Premium Subscriber
Joined
May 12, 2012
Messages
35
I was just curious as to what the appropriate IMPRES charger would be for a lithium ion battery for my XTS 2500.

The battery im looking at is the: NNTN7335B NNTN7335 - Motorola IMPRES IP67 Battery - LiIon 2700 mAh

Would the WPLN411AR charger be appropriate for that type of battery?
 

KG4INW

Member
Premium Subscriber
Joined
Apr 9, 2009
Messages
1,551
Location
Midlothian, VA
You left a '1' off (WPLN4111AR) but yes, that's the one! It's IMPRES and tri-chemistry. Will also work with a bunch of other lines (Jedi, Saber, etc.)
 

Mpanella

Member
Premium Subscriber
Joined
May 12, 2012
Messages
35
Will it damage my impress or throw off the internal chip if I use a standard tri-chemistry charger in the meantime?
 

KG4INW

Member
Premium Subscriber
Joined
Apr 9, 2009
Messages
1,551
Location
Midlothian, VA
It has to be initialized in an IMPRES charger or you will lose all IMPRES abilities and void your warranty. Otherwise, afterwards, a few cycles is OK but it really should be used with the proper charger.
 
Status
Not open for further replies.
Top