I have a cdm1250 (aam25rkd9aa2an) with a corrupt codeplug and did not save the original one now will not read in cps does anyone have same model that could send me the a codeplug doesn't matter what's on it as long as I could re write it and get the radio back to working status would be appreciated thank you
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
CDM1250
- Thread starter RES27CUE
- Start date
- Status
This site may have what you need
http://www.codeplugsupersite.com/
Also there is a file within the CPS with blank codeplugs, but for the life of me I can not remember the name of it
http://www.codeplugsupersite.com/
Also there is a file within the CPS with blank codeplugs, but for the life of me I can not remember the name of it
Jigglehurts
Member
If your CPS is installed correctly, you will find sample codeplugs for all models of mobiles and portables in a sub-folder labeled SAMPLES on your computer. C; ---> Program Files ---> Motorola ---> Professional Series CPS ---> Samples
I found this on a similar topic from a couple years ago. From a knowledgeable RR user/contributed.
I found this on a similar topic from a couple years ago. From a knowledgeable RR user/contributed.
Thanks for the input still can't get it going found a radio with same model number and tried to write it and didn't work someone said it had to be blank I'm unsure what else to do at this point might have become a paper weight
So writing the matching sample code plug from the sample folder in your CPS did not fix the problem?
I have R06.12.08 and couldnt find the matching model number in the samples
What's the tanapa code from the radio's label?
VA3HQB
Member
I cant even get CPS to read from my CDM1250's.... It keeps telling me to check my cables.
- Status
