RadioReference on Facebook   RadioReference on Twitter   RadioReference Blog
 

Go Back   The RadioReference.com Forums > U.S. Regional Radio Discussion Forums > North Carolina Radio Discussion Forum


North Carolina Radio Discussion Forum - Forum for discussing Radio Information in the State of North Carolina.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #101 (permalink)  
Old 06-07-2018, 12:03 PM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: Jul 2008
Posts: 263
Default

NC was approved fro 4.1 million for construction of new viper towers across the state 2018/19
Reply With Quote
Sponsored links
  #102 (permalink)  
Old 06-07-2018, 4:09 PM
Member
  Shack Photos
Shack photos
Premium Subscriber
Premium Subscriber
Amateur Radio Operator
Amateur Radio
 
Join Date: Jun 2011
Location: Willow Springs, NC
Posts: 67
Default

Maybe I'm just missing it but can someone point me in the direction of a list of all site frequencies. I don't need them by tower site since the programming on the Unication isn't tired to each site, just looking for a overall list to program. Looking at the database it will take me forever to figure out which frequencies are used on several sites.
__________________
Zack A
W4ZWA
Reply With Quote
  #103 (permalink)  
Old 06-07-2018, 4:15 PM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: May 2016
Location: Candler, NC
Posts: 29
Default

Quote:
Originally Posted by W4ZWA View Post
Maybe I'm just missing it but can someone point me in the direction of a list of all site frequencies. I don't need them by tower site since the programming on the Unication isn't tired to each site, just looking for a overall list to program. Looking at the database it will take me forever to figure out which frequencies are used on several sites.
I can create a spreadsheet of frequenciea by a certain area or by state as a whole if you would like that

Sent from my LGUS997 using Tapatalk
Reply With Quote
  #104 (permalink)  
Old 06-07-2018, 4:20 PM
Member
  Shack Photos
Shack photos
Premium Subscriber
Premium Subscriber
Amateur Radio Operator
Amateur Radio
 
Join Date: Jun 2011
Location: Willow Springs, NC
Posts: 67
Default

Quote:
Originally Posted by AJIComm1 View Post
I can create a spreadsheet of frequenciea by a certain area or by state as a whole if you would like that

Sent from my LGUS997 using Tapatalk
The whole state would be great. I programmed another G5 last year that could monitor the Viper state wide...worked great other then the fact it took FOREVER to input each site and each site control and alternate frequency. Once I completed the task I realized the same ones were repeated over and over through out the system. Trying to save some time on programming my new G4.

Thanks!
__________________
Zack A
W4ZWA
Reply With Quote
  #105 (permalink)  
Old 06-07-2018, 4:22 PM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: May 2016
Location: Candler, NC
Posts: 29
Default

Quote:
Originally Posted by W4ZWA View Post
The whole state would be great. I programmed another G5 last year that could monitor the Viper state wide...worked great other then the fact it took FOREVER to input each site and each site control and alternate frequency. Once I completed the task I realized the same ones were repeated over and over through out the system. Trying to save some time on programming my new G4.

Thanks!
If you can send me a way to email it to you. You just want control and alt frequencies or all freq

Sent from my LGUS997 using Tapatalk
Reply With Quote
Sponsored links
  #106 (permalink)  
Old 06-07-2018, 4:36 PM
troymail's Avatar
Silent Key
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Supply (Lockwood Inlet area), NC
Posts: 9,977
Default

Quote:
Originally Posted by W4ZWA View Post
Maybe I'm just missing it but can someone point me in the direction of a list of all site frequencies. I don't need them by tower site since the programming on the Unication isn't tired to each site, just looking for a overall list to program. Looking at the database it will take me forever to figure out which frequencies are used on several sites.
Attached is a list of all unique frequencies in the RRDB for VIPER.
Attached Files
File Type: txt VIPER Unique Frequencies.txt (4.9 KB, 51 views)
__________________
Unication G5(UHF)
TRX-2,TRX-1,WS1098,1088x2,1095,1080, PSR1080,PSR500,PRO96
BCD536,436,396T,BC296D,245XLT,600XLT,IV,VX-8R,MD-390
Reply With Quote
  #107 (permalink)  
Old 06-07-2018, 4:40 PM
Member
  Shack Photos
Shack photos
Premium Subscriber
Premium Subscriber
Amateur Radio Operator
Amateur Radio
 
Join Date: Jun 2011
Location: Willow Springs, NC
Posts: 67
Default

Quote:
Originally Posted by AJIComm1 View Post
If you can send me a way to email it to you. You just want control and alt frequencies or all freq

Sent from my LGUS997 using Tapatalk
All I need are the control and alt frequencies

w4zwa@yahoo.com
__________________
Zack A
W4ZWA
Reply With Quote
  #108 (permalink)  
Old 06-07-2018, 4:41 PM
Member
  Shack Photos
Shack photos
Premium Subscriber
Premium Subscriber
Amateur Radio Operator
Amateur Radio
 
Join Date: Jun 2011
Location: Willow Springs, NC
Posts: 67
Default

Quote:
Originally Posted by troymail View Post
Attached is a list of all unique frequencies in the RRDB for VIPER.
Thanks, are those all the frequencies or just control/alt
__________________
Zack A
W4ZWA
Reply With Quote
  #109 (permalink)  
Old 06-07-2018, 5:20 PM
troymail's Avatar
Silent Key
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Supply (Lockwood Inlet area), NC
Posts: 9,977
Default

Quote:
Originally Posted by W4ZWA View Post
Thanks, are those all the frequencies or just control/alt
That list was all (500) unique -- this one is unique frequencies marked as CCs.
Attached Files
File Type: txt VIPER Unique CC Frequencies.txt (728 Bytes, 42 views)
__________________
Unication G5(UHF)
TRX-2,TRX-1,WS1098,1088x2,1095,1080, PSR1080,PSR500,PRO96
BCD536,436,396T,BC296D,245XLT,600XLT,IV,VX-8R,MD-390
Reply With Quote
  #110 (permalink)  
Old 06-07-2018, 5:36 PM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: May 2016
Location: Candler, NC
Posts: 29
Default

Quote:
Originally Posted by W4ZWA View Post
All I need are the control and alt frequencies

w4zwa@yahoo.com
Email is sending now. It should come from brandon@ajientertainment.net

Sent from my LGUS997 using Tapatalk
Reply With Quote
  #111 (permalink)  
Old 06-08-2018, 9:43 AM
troymail's Avatar
Silent Key
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Supply (Lockwood Inlet area), NC
Posts: 9,977
Default

Quote:
Originally Posted by troymail View Post
That list was all (500) unique -- this one is unique frequencies marked as CCs.
Oops - found a problem in my previous list - this one is a more complete list of primary and alternate control channel frequencies system-wide....

Sorry 'bout that....
Attached Files
File Type: txt VIPER Unique CC Frequencies.txt (1.3 KB, 38 views)
__________________
Unication G5(UHF)
TRX-2,TRX-1,WS1098,1088x2,1095,1080, PSR1080,PSR500,PRO96
BCD536,436,396T,BC296D,245XLT,600XLT,IV,VX-8R,MD-390
Reply With Quote
  #112 (permalink)  
Old 06-08-2018, 12:49 PM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Hardy, VA
Posts: 14
Default

Quote:
Originally Posted by troymail View Post
Oops - found a problem in my previous list - this one is a more complete list of primary and alternate control channel frequencies system-wide....

Sorry 'bout that....
You still missed a few (e.g. 771.88125 on the Lagoon site). Here is an even more complete list:
Attached Files
File Type: txt VIPER Unique CC Frequencies.txt (2.3 KB, 84 views)
Reply With Quote
  #113 (permalink)  
Old 06-11-2018, 12:03 PM
Member
   
Join Date: Aug 2014
Location: municipality of great state of insanity
Posts: 268
Default

Quote:
Originally Posted by ATLiens View Post
Salemberg is home for the NC Justice Academy Campus. You were possibly hearing DPS-SBI Special Agent Training activities.
just an fyi, rarely monitor VIPER but over the past 2-3 weeks have caught same type traffic on this TG

RIDs were all 20222xx

two i wrote down were:
2022217
2022249

can't say what tower it was off of but i was in stanly county, albemarle area. thats all.

also thanks for sharing the VIPER freq lists. been wanting something like that

Last edited by spacellamaman; 06-11-2018 at 12:05 PM.. Reason: list
Reply With Quote
  #114 (permalink)  
Old 06-11-2018, 5:11 PM
Member
  Audio Feed Provider
Audio Feed Provider
Amateur Radio Operator
Amateur Radio
 
Join Date: Jul 2014
Location: Raleigh, NC
Posts: 750
Default

According to the RR Wiki list those should be NCDPS radios.

North Carolina VIPER P25 Radio ID's - The RadioReference Wiki
__________________
Whistler TRX-1, Radio Shack Pro-668 (mod), Pro-197, Pro-651, Pro-106, Pro-96
Baofeng 888, UV82, UVB5, Connect Systems CS750
Reply With Quote
  #115 (permalink)  
Old 06-14-2018, 11:34 AM
Member
  Premium Subscriber
Premium Subscriber
 
Join Date: Jul 2008
Posts: 263
Default

Does anyone have info on a DOT Viper talk group for fay/Cumberland or what dist they are in I know they are still low band but are they to have a viper Tag.
Reply With Quote
  #116 (permalink)  
Old 06-17-2018, 6:00 PM
tommul05's Avatar
Member
   
Join Date: Mar 2005
Posts: 64
Default

Is there a list of the site locations? I am going to Brunswick County soon. I have the talkgroups programmed, but what site is closest to that area? I didn't want to leave all the sites programmed as I assume that will significantly slow down scanning.... I have the same issue here at home (Indian Trail) I deleted all sites except Monroe, but I am not sure this is the correct thing to have done... I'm using a new SDS100.. Thanks for any input
Reply With Quote
  #117 (permalink)  
Old 06-17-2018, 6:04 PM
troymail's Avatar
Silent Key
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Supply (Lockwood Inlet area), NC
Posts: 9,977
Default

Quote:
Originally Posted by tommul05 View Post
Is there a list of the site locations? I am going to Brunswick County soon. I have the talkgroups programmed, but what site is closest to that area? I didn't want to leave all the sites programmed as I assume that will significantly slow down scanning.... I have the same issue here at home (Indian Trail) I deleted all sites except Monroe, but I am not sure this is the correct thing to have done... I'm using a new SDS100.. Thanks for any input
https://www.radioreference.com/apps/...d=7118&type=rr

There are four sites in Brunswick County - Bolivia, Supply, Southport, and Pea Landing.
__________________
Unication G5(UHF)
TRX-2,TRX-1,WS1098,1088x2,1095,1080, PSR1080,PSR500,PRO96
BCD536,436,396T,BC296D,245XLT,600XLT,IV,VX-8R,MD-390
Reply With Quote
  #118 (permalink)  
Old 06-18-2018, 9:04 AM
Member
   
Join Date: May 2016
Location: Magnolia, NC
Posts: 25
Default

When listening to VIPER communications in Duplin and Sampson Counties, I hear 911 dispatchers say the following several times a day, every day: "Repeat your traffic. Your radio went digital."

I assume this occurs when the signal received at the tower site is not of sufficient strength for it to be properly decoded and the result is garbled voice (both for the dispatcher and on my scanner).
I know that this can be caused by the use of portable radios instead of vehicle mounted radios and I know that there is a large gap in towers where Northwest Duplin, Northeast Sampson and Southern Wayne counties meet (zoom in on the RR tower site map). I also realize that the VIPER system is not yet complete.

I was just curious if this is heard in other areas of the state every day.
Reply With Quote
  #119 (permalink)  
Old 06-18-2018, 9:19 AM
troymail's Avatar
Silent Key
  Premium Subscriber
Premium Subscriber
 
Join Date: Dec 2002
Location: Supply (Lockwood Inlet area), NC
Posts: 9,977
Default

Quote:
Originally Posted by NOBEES View Post
When listening to VIPER communications in Duplin and Sampson Counties, I hear 911 dispatchers say the following several times a day, every day: "Repeat your traffic. Your radio went digital."

I assume this occurs when the signal received at the tower site is not of sufficient strength for it to be properly decoded and the result is garbled voice (both for the dispatcher and on my scanner).
I know that this can be caused by the use of portable radios instead of vehicle mounted radios and I know that there is a large gap in towers where Northwest Duplin, Northeast Sampson and Southern Wayne counties meet (zoom in on the RR tower site map). I also realize that the VIPER system is not yet complete.

I was just curious if this is heard in other areas of the state every day.
This is interesting in that it seems every time I drive through the Sampson/Wayne (Mount Olive) area (exit 355 off I-40), all of my radios - including my G5 - have lots of trouble finding a good signal/tower...

On a related note - living here in southern Brunswick County, there are many times I've heard units in Sunset Beach and other places along the coast that are unable to communicate with the dispatchers and resort to using cellphones. Reception at my house is "iffy" on a regular basis from the two closest towers (Supply, Bolivia). When we get heavy rain, I even watch my G5 lose signal of times ("Out Of Range") only to return a short time later when the sun returns. I don't recall ever seeing any system reception degrade that significantly during a rain storm (but I've never lived along the coast before either).
__________________
Unication G5(UHF)
TRX-2,TRX-1,WS1098,1088x2,1095,1080, PSR1080,PSR500,PRO96
BCD536,436,396T,BC296D,245XLT,600XLT,IV,VX-8R,MD-390
Reply With Quote
  #120 (permalink)  
Old 06-18-2018, 9:26 PM
tommul05's Avatar
Member
   
Join Date: Mar 2005
Posts: 64
Default OIB police

Hey TROYMAIL, What does ocean isle beach PD talk on? They on viper or something else?
Reply With Quote
Reply

Tags
durham trunk frequencies, nchsp, sticky

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 1:02 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
All information here is Copyright 2012 by RadioReference.com LLC and Lindsay C. Blanton III.Ad Management by RedTyger
Copyright 2015 by RadioReference.com LLC Privacy Policy  |  Terms and Conditions