APX7000 P25 Phase II Monitor

[KG1ADP]

I will post a band plan tonight that should work

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[N0WRE]

I will post a band plan tonight that should work

Sent from my SAMSUNG-SM-N910A using Tapatalk

I got my XTS2500 to work on this but it misses a lot. Should it just be the CC and Alt CC to make sure it picks up traffic faster? I have two sites programmed in with all the relevant frequencies that showed up in unitrunker but maybe that's to much? Because right now I have each site programmed for the data, voice, CC and Alt CC that the program lists for the site.

Suggestions?

Thanks

 

[KG1ADP]

Send me your codeplug...
Ke5yoy@gmail.com

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[N0WRE]

Codeplug Sent. I am still working on the APX for this project. Thanks for the help.

 

[4-crime]

Also, make sure that under Trunking System, Astro 25 that the box for "Validate NAC Against System ID" is UNCHECKED.

If the box is checked the channel will show activity but no audio will unmute from the radio.

 

[N0WRE]

Also, make sure that under Trunking System, Astro 25 that the box for "Validate NAC Against System ID" is UNCHECKED.

If the box is checked the channel will show activity but no audio will unmute from the radio.

Actually I would say it depends on the system you are monitoring, I have mine checked and it works just fine. Radio scans and un-mutes with no problems.

 

[dynacomm]

Pahse 1 Cp

Guys can you shoot me a code-plug for a P25 Phase 1, Have a APX 7000 ide like to use to monitor local 800 IPSC system,


Thank's!
Stu

 

[riveter]

APX7000s can only do analog FM and digital P25 modulation. They cannot monitor or transmit in DMR/MOTOTRBO digital (e.g. IP Site Connect)... if that's what you meant by IPSC.


What do you need from the codeplug? Setup examples?

 

[KC2ZHY]

I'm trying to do this with my APX8000 now; unfortunately, the P25.ca site no longer exists. Does anybody have a copy of their instruction sets? I'm stuck at a spot where every time I set the System ID, it flags it as invalid.

 

[KevinC]

I'm trying to do this with my APX8000 now; unfortunately, the P25.ca site no longer exists. Does anybody have a copy of their instruction sets? I'm stuck at a spot where every time I set the System ID, it flags it as invalid.

Umm...you need a system key for each system.

This is pretty basic knowledge, so I'd suggest searching a lot more for instructions before you proceed any further.

And we'll be waiting for you to return asking why my radio won't turn on anymore. :wink:

 

[KC2ZHY]

Umm...you need a system key for each system.

This is pretty basic knowledge, so I'd suggest searching a lot more for instructions before you proceed any further.

And we'll be waiting for you to return asking why my radio won't turn on anymore. :wink:

I've tried this whole "searching for more instructions" thing; no dice. Figured I would come here asking for some more directed, experienced advice...

 

[NotATechGuy]

Here's my advice, stick with the scanners. Don't like that advice? Okay, learn what you are trying to do on a less expensive radio or get someone who knows what they are doing to do it.

Oh and the p25.ca instructions to NA scan are online. Try googling a little bit.

 

[KevinC]

Here's my advice, stick with the scanners. Don't like that advice? Okay, learn what you are trying to do on a less expensive radio or get someone who knows what they are doing to do it.

Oh and the p25.ca instructions to NA scan are online. Try googling a little bit.

Yep, and with that I'm closing this before it gets out of hand.

 

[davidzimmerman]

i think the SAFE thing is to get one of the G4 Pagers i use to use a XTS2500 WORKS great