Version 3.11 - January 18, 2018
- Fixed issue with the Delete Multiple button on the trunked systems tab not adjusting position when the screen is resized.
- Fixed an issue where talkgroup IDs were not being displayed properly for EDACS, LTR, and some NXDN systems in the Scanlist tab.
- Fixed recurring issue when rounding frequencies based on bandplan between 450MHz and 470MHz.
- Fixed an issue with loading Backlight/LED presets where the app was loading the incorrect colors for Red and Blue.
- Added option to sort the site list on the trunked system screen. This sort is on-screen only.
- Corrected issue with conventional P25 transmissions showing talkgroup IDs as Wildcard!
- Fixed an issue with Clipboard/CSV import for talkgroup objects where the record flag was being set to the opposite value that should have been set.
- Fixed an issue with Clipboard/CSV import for talkgroup objects where the Scanlists option was not present in the field pull-down listing.
- Updated help file.
- Fixed an issue where the Location Based scanlist names were still being displayed in the app when the selected bandplan was not set to United States.
- Fixed issue where scanlists were not being updated when changed in the conventional objects listing until the next restart or file transfer.
Version 3.10 - October 24, 2017
- Fixed issue where the application would fail to download the CPU Firmware update with a 404 error when CPU firmware 5.5 has been loaded onto the radio.
- Fixed an issue where the talkgroup ID of one recording may be carried over to the next recording in some cases in the audio file list.
- Fixed issue where the blink settings on presets for the LED were not being set correctly when using the Load Preset options.
- Added option to allow the deletion of multiple trunked systems at the same time.
- Added an update options section to the Set Location screen.
Version 3.9 - June 30, 2017
- Fixed an issue with updating objects from the library where alpha tags could be incorrectly applied to the wrong objects under certain conditions.
- Fixed an issue with updating NXDN conventional objects from the library.
- Fixed issue where some recordings may display an incorrect radio id in certain cases. Note that not all recordings will have a radio ID present.
Version 3.8 - June 12, 2017
- Added progress bar to conventional import from a text file/clipboard when more than 25 items are being imported.
- Fixed issue where conventional import would attempt to import the header row under certain cases and display an error line.
- Corrected issue where the uninstall information was showing an incorrect version number.
Version 3.7 - May 26, 2017
- Corrected the Invalid Certificate issue, and updated SSL parameters to resolve the timeout errors.
Version 3.6 - May 24, 2017
- Fixed issue when selecting the Australian bandplan for a trunked system showing the bandplan as blank the next time the data folder was opened.
- Fixed issue when selecting the Australian bandplan on the General Settings tab where the option would not be preserved and the prompt to set a bandplan would appear on the next load.
- Fixed an issue in the bandplan prompt where the United Kingdom and Australian bandplans where not being presented and options to be selected.
- Fixed issue on conventional import where certain frequencies in the air band were being rejected as invalid frequencies when they were in fact valid.
- When importing conventional objects, the result page now has an option to display a listing of items that could not be imported. These items typically have a frequency outside the ranges supported by the scanner.
- Fixed a regression issue where frequencies imported between 450 MHz and 470 MHz were being imported 3.125 KHz higher than they should have been.
Version 3.5 - May 22, 2017
- Redesigned the advanced options tab to include sub-tabs to allow the addition of new options and group like settings together.
- Added edit options for the RSSI received signal bars to the advanced options tab under the Display Options sub-tab.
- Added Load Defaults button on the DSP settings on the Receive/PCIF Options sub-tab.
- Moved the Low Battery Alert interval setting from the Alert Settings area on the General Settings tab to the Battery Options Sub-Tab on the Advanced Settings Screen.
- Added Australian band plan.
- Added Options to allow modification to the ZeroMatic values for the scanner, including a Load Defaults button on the Receive/PCIF Options sub-tab.
- When copying between the computer and the SD card, the default Delete flag will now be set to No.
- Corrected an issue when creating a new conventional channel using a CTCSS or DCS squelch value, the stored value would be saved incorrectly.
- Changed the Zeromatic code to verify and correct all values if they are found to be outside of allowed ranges.
- Fixed a crash bug when attempting to load a list of trunked systems for import. This only occured in some areas and under extreme circumstances.
- Corrected an issue where the trunking tables on Motorola VHF and UHF systems were not being set correctly when imported using the preferred method.
- Added option to the file menu to import the configuration from a WS-1040/WS-1065 or compatible scanner. This function will only download from the source scanner's working memory. It will not download from a V-Scanner folder directly.
- The PC Application now connects to the update site using SSL to check and download updates.
- Updated the Save Configuration to Archive option to honor the -d command line switch.
- Updated the sort process for the Scanlists tab to speed up the process.
Version 3.4 - March 14, 2017
- Corrected issue when adding an analog conventional channel from the scanlist tab where the settings for NXDN would be displayed when attempting to set the CTCSS/DCS/NAC values.
- Added filters to disable importing of frequencies that are outside of the scanner's frequency range.
- Fixed an issue where the frequency rounding process in the UHF range was incorrectly rounding the entered frequency down 3.125KHz below the desired frequency.
Version 3.3 - February 27, 2017
- Corrected an issue with creating a new system during the import from the library process where encrypted channels were not being imported when the option to do so was enabled. This required changing how the app handled these settings internally which means that anytime the import options are changed and the OK button is selected on that screen, the selected options will be saved and used until changed.
- Updated handling of all bandplans.
- Updated all supported bandplans.
- Changed how the app handles entry of frequencies. Previously the app would verify a frequency to make sure it fit the scanner's bandplan and step size within that range. The app now will verify that the frequency is in the scanner's frequency range and then round off the entered frequency to the nearest frequency that matches the bandplan if necessary.
- ZeroMatic Updates.
- Added the ability to sort the system listing on the Trunked Systems tab. This feature will sort the list by clicking on the column header. This action only changes the order that systems are displayed, it will not actually change the order of systems on disk.
- Updated informational message when checking for all updates.
- Corrected tab order and tab stops in the library import areas.
- Moved the Import and Clear buttons to the middle of the screens in the library import area.