BCD325P2/BCD996P2: BCD996P2

Status
Not open for further replies.

KC4ASF

Feed Provider
Premium Subscriber
Joined
Sep 27, 2002
Messages
423
Location
Fredericksburg, VA
Thinking about getting one of these, would you recommend it? One of my biggest questions would be is the display easily readable, especially compared to the 536 models, any other information would be appreciated


Sent from my iPhone using Tapatalk Pro
I have both and the display is good on the 996p2. They are right that simulcast problems are big.
 

TxScanner

Member
Premium Subscriber
Joined
Dec 28, 2012
Messages
805
I have both and the display is good on the 996p2. They are right that simulcast problems are big.

Only one city near me uses that, but I’m to far away to pick it up anyway


Sent from my iPhone using Tapatalk Pro
 

Kfred

Member
Joined
Sep 16, 2007
Messages
87
Location
Early, TX
thinking about buying a 996P2. How good are the filters in the 996P2 on vhf ? My BC780xlt and BC700A get over loaded with intermod. I use a kenwood TK730G to fix the intermod problem but I can not program it as easily. and it only receives vhf .
 

iMONITOR

Silent Key
Premium Subscriber
Joined
Sep 20, 2006
Messages
11,156
Location
S.E. Michigan
thinking about buying a 996P2. How good are the filters in the 996P2 on vhf ? My BC780xlt and BC700A get over loaded with intermod. I use a kenwood TK730G to fix the intermod problem but I can not program it as easily. and it only receives vhf .

Are you talking about interference on the air-bands? The 996P2 is excellent. If you don't require digital capabilities, consider the BCT15X for about 1/3 the cost!
 

Kfred

Member
Joined
Sep 16, 2007
Messages
87
Location
Early, TX
Have problems with vhf fm on closely spaced frequencies . When 155.490 and 155.550 transmit at the same time I receive them both on 155.670. Could be a harmonic generated by two freqs mixing. 154.325 comes in on 155.340. When I am close enough to see police vehicle and it is tansmitting I cant hear repeater output on scanner.
 

iMONITOR

Silent Key
Premium Subscriber
Joined
Sep 20, 2006
Messages
11,156
Location
S.E. Michigan
thinking about buying a 996P2. How good are the filters in the 996P2 on vhf ? My BC780xlt and BC700A get over loaded with intermod. I use a kenwood TK730G to fix the intermod problem but I can not program it as easily. and it only receives vhf .

I dobt you have the same problem with the BCD992P2. The BC780XLT while still widely in use and highly respected, it's getting a little long in the tooth!

It sounds like the BC780XLT creates some of it's own problems (Birdies):

Uniden BC780XLT Trunk Tracker III
- Bob Panass Monitoring Times Magazine Review
http://www.monitoringtimes.com/html/mtscan0301.pdf
 
Status
Not open for further replies.
Top