SDS100/SDS200: SDS-100 | Won't scan some programmed lists

[Colin9690]

Hello,

I'm new to Uniden scanners, but not the hobby. Anyways, my SDS-100 skips over some of my favorites lists I have programmed. The ones being skipped are a mixture of P25, LTR, and conventional. I have each assigned a quick key (0-21), and have each enabled in the "Select lists to scan" menu. But as I watch the scanning, it only scans roughly lists 0-15.

Any ideas would be appreciated!

 

[doctordialtone]

Check your Service Types

 

[ECPD279]

Make sure each level of the list (Favorite List, System, Department) is turned on if you've programmed quick keys for them. For example, if you have FL 13 turned on, but System 1 within the FL is not turned on, you won't hear anything. If you're seeing asterisks in the top of your display where the scanned objects are shown, something isn't turned on.

 

[tvengr]

In the profile editor, make sure that Download and Monitor are both On for each favorites list.

 

[Reconrider]

Also to add, because I didn’t see it, make sure you have talk groups added to the trunk system or have “id search” enabled.

 

[ofd8001]

Quick keys turned off
Location Control issue (if used)
"Stuff" avoided

Basically anything you might see in the Nothing to Scan checklist.

 

[Colin9690]

Thanks for all the tips guys. When I get home I’ll give each a try and report back.

I can attach a screenshot of what it’s doing as well.

 

[Colin9690]

Update: Fixed! I had to enable the proper service types. Thanks again everyone.

 

[doctordialtone]

Bingo! Good find!