• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Farm Base Station multiple consoles.

Status
Not open for further replies.

bsigg

Member
Joined
Jul 17, 2011
Messages
24
Hi,

I just wanted to rig up a base station in the house with a Motorola CDM 750/1250. How does one go about setting up a deskset/console with them?

I don't want to do anything fancy with them I just want to be able to use the phones to monitor and talk over the radio from different parts of the house without having to be at the main radio.

Is there another brand of radio that might be better and/or cheaper for doing something like this?

Thank you.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,881
Location
Roaming the Intermountain West
Depends on exactly what you are looking for.

If you only need one additional station, the rear 20 pin connector on these radios has a speaker output, a mic input and a push to talk input. You could just install a speaker and microphone is a second location. You'd still be able to hear the traffic through the speaker on the front of the radio and use the stock microphone.

If you need more than one additional station, you'd probably want to look at a tone remote setup.

Alternatively you could take the flat audio output off the 20 pin connector and use it to feed an amplifier and install speakers around your home.

Another option is to use a wireless hand mic. They are good for "up to" 1000 feet:
X10DR - Secure Wireless Microphone for Mobile Vehicle Two Way Radio - Secure Wireless Microphone for Mobile Vehicle Two Way Radio

Probably a few other ideas that others will add to those above.
Basically it comes down to exactly what you need and what your budget is. This is fairly straight forward, but it won't be a free/cheap/easy solution.
 

n0nhp

Member
Joined
Dec 1, 2005
Messages
773
Location
Grand Junction
Years ago, I put in a remote system on a keyline phone system where the user could dial into a "conference" and it allowed anyone in the building to monitor and talk on the radio. The VOX was a pain in the tail and training was worse.
It sounds like you want to use your home phone system, I don't know of any equipment to do that.
If you are willing to run wires, almost all two way dealers will have some old tone remote systems hanging around as most new commercial customers have computer networks and VOIP remotes are replacing the old tone/dc remote units.
For a single remote location mmckenna's solution may be your solution.
Unless the base antenna is needed for the range, some of the cheap Chinese handheld radios will give local area connection at a lower cost than setting up remote consoles.

Bruce
 
Status
Not open for further replies.
Top