• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

CPI DC remote programing info

Status
Not open for further replies.

N0ZQR

Member
Premium Subscriber
Joined
Feb 16, 2003
Messages
350
Location
Nebraska
Anyone here have information on two tone programing of a CPI DC10 remote with the UE-1 option.

I know I have the information somewhere! But can't seem to find It!

! Need to program the UE-1 for Motorola group six (6) two tone encode for Motorola Min V pagers.

Thanks!!

Ron
 

N0ZQR

Member
Premium Subscriber
Joined
Feb 16, 2003
Messages
350
Location
Nebraska
I have that, just can't remember the specific information to do it!
 

kf8yk

Member
Joined
May 3, 2003
Messages
716
Download the keypad programming manual from the Midian web site

Look at table 8 & pick a tone plan that has group 6 tones (plan 'A' does, so does plan 'E')

Use table 5 and look up the plan number for your chosen tone plan (plan A = 21, plan E=25)

Enter programming mode ( 27182818284 )

Program register 9 for your chosen plan and timing: ( 2110003000*09 )

Exit programming mode ( *00 )
 
Status
Not open for further replies.
Top