Pro-668 Signal Issues

Status
Not open for further replies.

Acru1012

Member
Joined
Feb 11, 2013
Messages
6
Location
Graham, North Carolina
I have a Pro 668 scanner and have been trying to get Watauga County Fire, Rescue, and Boone Fire. There are frequencies in 150.000s (I assume for volunteer's pagers), but also they have channels in the Viper system (800 MHz). I have a 800 MHz antenna but from inside my apartment, I cannot get them because the signal strength is low. Go outside and such, I have good reception. Any idea what is going on here? Should I get a different antenna?
 

Fasteddy2

Member
Premium Subscriber
Joined
Oct 29, 2011
Messages
63
Location
CALIFORNIA
Pro-668

I have a Pro 668 scanner and have been trying to get Watauga County Fire, Rescue, and Boone Fire. There are frequencies in 150.000s (I assume for volunteer's pagers), but also they have channels in the Viper system (800 MHz). I have a 800 MHz antenna but from inside my apartment, I cannot get them because the signal strength is low. Go outside and such, I have good reception. Any idea what is going on here? Should I get a different antenna?

Do you have the Whistler upgrade makes the scanner 10x better.
 

Wackyracer

Member
Premium Subscriber
Joined
Feb 18, 2016
Messages
1,897
Go to whistlergroup.com select legacy upgrade,
When you get it back, if you still have the problem , get yourself a outside antenna.
 
Status
Not open for further replies.
Top