Search results

  1. bearcatrp

    Antenna bent from storm

    Ouch. Storm beat the crapola out of it. Looks like you have some trees down behind you.
  2. bearcatrp

    BCD436HP: 436 went deaf on P25

    When I was changing antennas, the extra one that came with the 436 would make hiss noice when attaching. The other ones did not do this. Kept trying to see if that spacer would move but didn't budge. After trying it with my discount and nothing received, I tried again and it moved. trying both...
  3. bearcatrp

    BCD436HP: 436 went deaf on P25

    Figured it out. A big DUH moment. I purchased the 436 that came with an additional antenna. It comes with this spacer that goes on the antenna port. I forgot about that. Kept looking at this but it looked like it was part of the radio. It was on tight too. It moved this morning so took it off...
  4. bearcatrp

    BCD436HP: 436 went deaf on P25

    Have both 436 and the R30 hooked up to my discone for the past hour. The 436 is locked on P25 system so it will scan only P25. The R30 is picking up allot of P25, the 436 has yet to pick up any P25. Guess I will wait for Unidens response from my email to see what they say. Will probably send it in.
  5. bearcatrp

    BCD436HP: 436 went deaf on P25

    Did a full database update, reset the radio, and will not pick up P25. Am currently scanning with my 436 and my R30 on my window seal. R30 is picking up multiple transmissions. Nothing on the 436. Just emailed uniden explaining the issues. My guess its going to uniden for them to check it out.
  6. bearcatrp

    BCD436HP: Database updates not loading

    Just updated the 436. Did do the force update. It worked. Checking it out now to see if that helps my other issue.
  7. bearcatrp

    Antenna bent from storm

    Thanks folks. Just bent the 3 radials back as straight as I can. The rest is ok. Its back up so will test it out tonight.
  8. bearcatrp

    BCD436HP: 436 went deaf on P25

    The R30 scans only what Freqs I put in the radio. In this case, all the P25 freqs in my area I listen to.
  9. bearcatrp

    Antenna bent from storm

    My discone antenna hit the ground last night from the 90 mph winds. From what I have seen so far, the radials that stick straight out from the center bent on a couple of them. Doesnt look like the long ones got damaged but can't do a thorough inspection until tonight after work. I can straighten...
  10. bearcatrp

    BCD436HP: 436 went deaf on P25

    They were not off line as my R30 and SDS200 were receiving continuous transmissions through out the storm.
  11. bearcatrp

    BCD436HP: Database updates not loading

    Will try that. Thanks.
  12. bearcatrp

    BCD436HP: Database updates not loading

    Will give that a try. Thanks ProScan.
  13. bearcatrp

    BCD436HP: 436 went deaf on P25

    I don't think its the sd card. Can pick up noaa weather, and picks up analog fire pagers. Not one P25 hit at all. I can see its scanning the P25 sites on the screen. The storms blew my discone over last night so won't be hooking that up for awhile. Have some bent parts from looking at it this...
  14. bearcatrp

    BCD436HP: Database updates not loading

    not using proscan to do any updates. Just sentinal.
  15. bearcatrp

    BCD436HP: 436 went deaf on P25

    Had bad storms yesterday and today. Last night, had the 436 and my R30 running. R30 picking up digital great. 436 is picking up analog only. Going through storms again today. fired up my 200, 436 and R30. The 436 is not picking up anything digital. Been reading the easy to read 436 to see if...
  16. bearcatrp

    BCD436HP: Database updates not loading

    3/20/22 is last update on the 436. Database version on sentinal is 5/2/22 Is it possible sentinal is confused with my SDS200? I do verify in sentinal its the 436 hooked up.
  17. bearcatrp

    BCD436HP: Database updates not loading

    Yep, thats it. Am on version 2.2 version 1 for sentinal. Just tried again and getting same message.
  18. bearcatrp

    BCD436HP: Database updates not loading

    Have had my 436 for 2 months. Have plugged it in sentinal at least 4 times and always says database it current. Do I just go with it or wipe everything out, reset the 436 and load it? Thanks.
  19. bearcatrp

    BCT15X: BCT15X programming (cable)

    I bought this cable from amazon. Works great for the BCT15X and long too. https://www.amazon.com/Adapter-Bearcat-UBC3300XLT-Scanner-Programming/dp/B08CVKGLDD
  20. bearcatrp

    ProScan: Read from Uniden 15X

    You have to create a new database. Then you can download from the scanner to make changes to upload back to the scanner. Doesn't quite spell it out in the help file but close enough to figure it out.
Top