• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Search results

  1. C

    SDS100,200,LSM, and BCD325P2...

    Actually, Given the female port is black inside, Don't know how but it is and obviously needs cleaned, I might try the paperclip. Excuse my ignorance, But, TV Tuner inside the SDS? I'm lost.
  2. C

    SDS100,200,LSM, and BCD325P2...

    Thanks, Will do.
  3. C

    SDS100,200,LSM, and BCD325P2...

    The APX7000 has a serious punch. I miss mine. Yagi is out of the question as I'm either mobile or don't want to wear out the BNC constantly switching out. Bad enough I need to clean the female end on mine and can't. I can, But it never seems to stay clean and I can't tell when it is. Thinking of...
  4. C

    Needing advice on radio, Not sure what to do.

    I already have a thread started in the Uniden section here: https://forums.radioreference.com/threads/sds100-200-lsm-and-bcd325p2.394815/#post-3189720 Not sure what to do for this area and wondering if anyone else has this problem or a possible solution. Thanks.
  5. C

    SDS100,200,LSM, and BCD325P2...

    Audio recording through a network isn't a requirement at all and it will mostly be used everywhere I go. Pagers aren't really my thing right now. I'll post a link to this tread down there and see what they say. Thanks.
  6. C

    SDS100,200,LSM, and BCD325P2...

    03-003 Houston P.S. Southeast.
  7. C

    SDS100,200,LSM, and BCD325P2...

    Currently have a BCD325P2 monitoring TxWarn and it does fine for the most part minus one site. Given that it is only one site that I'm aware of, and the problem site usually shows signs of weak signal with P25 decode rate always changing and hard to get a lock where it needs to be, High error...
  8. C

    What antenna is the best for the Uniden BCD325P2

    Everyone has already answered this but I get good results from a wire bread tie shoved in the bnc port....
  9. C

    "Chirp" needs to be more specific.

    Finally got it somewhat programmed. Had to sort through the 1300 frequencies chirp pulled from the database then manually run through the ones I needed to replace the names with more practical ones. This is the second time I've tried using RR for "easier" programming but I end up doing it...
  10. C

    "Chirp" needs to be more specific.

    A filter is not a high end feature. Or, don't list EVERY single frequency in the county short of P25.
  11. C

    "Chirp" needs to be more specific.

    True but that is highly un likely to get a resolution since this is how the code was written and GUI designed. Is it possible to download the list as a CRV file? Would hate to think I just spent $15 for nothing.
  12. C

    "Chirp" needs to be more specific.

    How can I instruct chirp of what I specifically want to download from the database to program the repeater list? I don't want or need vice, narc, or HPD dispatch simulcast. But it downloaded it also. All the prompt I found asked was name, password, and zip code. Over 1,300 results came back...
  13. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Unless I have the wrong frequencies, Or more lost than I thought, But when we tore down the old station, The site basically went with it because those frequencies are dead now. Long post short, What frequencies am I missing? I tried posting my freescan file but its not being recognized so I can't.
  14. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Site 03-003 is the only site I'm able to pick them up on. I'll try the other RFFS 3 sites again. Central like I've said works great as well as the others that I can tell so far. I've checked and can't find any other site using the same frequencies as 03-003 so how could it be LSM if only one...
  15. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Like I already wasn't confused enough.... I was mentioning 4 as an example of what it does When I try to change sites. The way our radios are programmed displays rssi then which site I'm on. Given our TG is above 30000 were on level 3 sites. However, Houston P.S. Southeast is closest, it locks...
  16. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Right, But we use site 3 unless a radio goes into another site range as its closest. If I manually search on the APX, I can just barely tap site 3-03 (4) but it won't stay. It goes right back to 3.
  17. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Heres the thing, I only have problems with the one site. All the others work fine. No other towers use the same frequencies as the trouble site does either.
  18. C

    BCD325P2: Pasadena PD only comes across one site. But no one else does.

    Wow. I never got an email notification for this..... I take criminal vehicles into their custody for various reasons. I talk directly to the dispatchers just like officers, Have my own call numbers like them, Everything. What gets me is, I can have my APX 7000 and BCD325P2 sitting beside each...
  19. C

    BCD325P2: Slow p25 and low audio

    Ive tried every setting possible in freescan and still have low volume at 15 no matter the TGID and some are slow to decode almost missing the transmission. The decode issue displays PT0 or PT1 ending in DAT. No LNK or P25 displayed. All sites are set the same. If someone with freescan is...
  20. C

    BCD325P2: Missing first few milliseconds of transmission of Mass SP Type II trunked system

    Same thing here on TxWarn. Tried everything and nothing.
Top