Search results

  1. K

    Grand Biloxi Hotel & Casino Setup

    Well, after much testing, I found a way to get most of the transmissions. I set-up a DMR trunked system with each frequency in a separate site, with 0 for the LCN's, and then added all the known talkgroups and radio ID's. This way it picks up the most of all setups I've tried, but I would say it...
  2. K

    Cobb Co, GA BoE/Schools - DMR?

    Are you trying to program it as just 1 conventional DMR channel, or as a while system? Digital search and the Color code are 2 different things. When you pick up a transmission, if it is DMR, it will display the color code that it uses. The digital code will also be displayed if it's using one...
  3. K

    Another Sentinel Issue

    Everytime I download the sentinal software, it usually has the .NET files in the archive. Mine is labeled "DotNetFX" and is a folder with the installer in it. Where are you downloading the sentinal program from? P.S. You might want to download it from here...
  4. K

    Grand Biloxi Hotel & Casino Setup

    I tried that, setting it up as a OFT system with all 5 frequencies, and also tried setting it up into 5 separate OFT systems with 1 frequency per system, and didn't hear a peep out of any of them.
  5. K

    Grand Biloxi Hotel & Casino Setup

    The TRX-1 is about the only way I can monitor it reliably, even though it doesn't trunk, since it doesn't require LCN's. About the only way to hear it on my 436 is to program all 5 frequencies into conventional, but then I can't program talkgroups and radio ID's. I tried programming all 5...
  6. K

    Grand Biloxi Hotel & Casino Setup

    No, it shows XPT for all 5 frequencies. I might try setting it up as a normal DMR trunked system, but then put each frequency into a separate site. But then I'm back to the weird LCN numbers again.
  7. K

    Grand Biloxi Hotel & Casino Setup

    Has anyone figured out how to get the system working in a scanner that trunks properly? I have 5 frequencies that are active for it: 451.325 451.725 451.9375 463.65 463.975 All are Color Code 1 and all show as XPT on my BCD436HP. In conventional, they have all picked up different talkgroups and...
  8. K

    SDS100: Sentinel BCDX36HP 2.02 Sort tg's

    Glad to be of help!
  9. K

    SDS100: Sentinel BCDX36HP 2.02 Sort tg's

    There's no reason to click the save button, to sort the TG's use the "AZ" button it the top and pick "TGID", then OK. Then close the "Red X" and it will ask you if you want to save changes, click YES and it will all be saved.
  10. K

    Updated Easier to Read Manuals for Whistler...

    Thanks! Very well done.
  11. K

    LCN to Frequency calculator for DMR TIII

    Here is another frequency and channel calculator I made a couple years ago. Don't know about using it on DT3 as I don't have any systems close, but it does work on DMR, NXDN, etc. It will work for standard and non-standard bandplans...
  12. K

    Official 2018 MSWIN TG ID Thread

    Because the 436 and TRX-1 show which site the frequency is being picked up from.
  13. K

    BCD436HP: IFX Help

    Thank you teknishun for explaining it so that even I understand it. It makes since now. I assume that the same info will apply to the BCD436HP as well as the SDS100 & 200? That is too bad that it doesn't work while scanning, I have a couple channels that I regularly monitor, but a paging service...
  14. K

    BCD436HP: IFX Help

    Even after reading thru the "Easier to read manual", I still don't know what it is and when to use it. Can someone explain in laymans terms what and when to use IFX? Is it used to make a frequency not lock up the scanner with interference, or if the voice comes in garbled, etc? Thanks in advance.
  15. K

    Official 2018 MSWIN TG ID Thread

    I live down here in Gulfport and have been picking up 2 tg's (13474 & 31165). I'm not sure what they are and picking up the 13474 from the New Albany (Union Co.) site, which is pretty much impossible since that is a LONG way away from me. 31165 I've picked up on the same New Albany site and also...
  16. K

    I'm Back!

    Welcome back Jon!
  17. K

    WS1080: Pro-668 (Upgraded) Limit Search Problems- Wrong Frequencies

    Ok, I'm got my legacy upgraded pro-668 to finally display the right frequency during limit searches. First, I tried changing the Slope setting as Whistler Wendy had suggested, but whatever I tried, doesn't make any difference. Then I tried changing the delay, and again no difference. Then I...
  18. K

    WS1080: Pro-668 (Upgraded) Limit Search Problems- Wrong Frequencies

    I'm only having the problem with my 668, my trx-1 works great. Maybe we should compare EZ-scan settings.
  19. K

    WS1080: Pro-668 (Upgraded) Limit Search Problems- Wrong Frequencies

    I'm having a problem with my pro-668 (legacy upgraded to ws1080) during the limit search. Every frequency that it detects is exactly .003125 too high. For example, on a known frequency of 461.9125, it will stop on 461.915625 every time. Is there any way to adjust for that variation so it stops...
Top