Search results

  1. Scan125

    scan25 transfer new list to bc125at

    Manual opens from Scan125 without you having to close the program or lose data. Note sure I understand. Where did you make up the list? If there is no USB cable connected or the scanner is off then you can not enter data into the Scan125 program. Scan125 works based on real time control and...
  2. Scan125

    BC125AT - 1.05.01 latest firmware - any updated info?

    Thanks Joe B. Don't forget to add Butel and their ARC125 program to your list.
  3. Scan125

    BC125AT - 1.05.01 latest firmware - any updated info?

    I'll have to keep an eye out for this as this could seriously affect Scan125 Control Program which currently allows a user to assign a virtual bank name. With this respect I'll need a firmware Version number after which bank names are supported. Also the relevant updated serial COM command...
  4. Scan125

    New to scanning

    Would add that it is important to understand that Scan125 is a "real time" control and editing program. It takes all the control states and storage/channel data when the program starts. So the scanner is the definitive "master" when the program starts and the Scan125 program is the "slave"...
  5. Scan125

    New to scanning

    Hi, Scan125 here: Ideally you should initially be reading the User Manual or using the mouse hover tool tip function from prompts. Scan125 User Manual - COM Port Refresh Scan125 has an [R] button in the COM Port Control Area. This R button when clicked will cause the program to go...
  6. Scan125

    DriveR8 Control Program - New Release

    I've just released V2.7.0.0 of DriveR8. This release now supports the use of traditional RS232 serial port in addition to the existing USB support via the Alinco USB interface cable. For full details please see DriveR8 Control Program. Nick
  7. Scan125

    BC125AT vs SR30C

    If one is looking for Civil Air Band only then the Yaesu FTA-250(L) is a really professional and certified air-band hand held transceiver. Features (some) that set it apart from other lesser models are: Weatherproof/Waterproof - IPX5 rating Rugged inner chassis Li-Ion batteries - large...
  8. Scan125

    BC125AT vs SR30C

    I've just gone through the SR30C and BC75XLT manuals and the only differences I can find are: 1) SR30C has 500 channels (10 banks of 50) compared to the BC75XLT 300 channels (10 banks of 30) 2) SR30C has Two Level Backlight (Off, 1, 2) compared to the BV75XLT Off/On only On this basis I'm...
  9. Scan125

    BC125AT vs SR30C

    For me and Scan75 supporting the SR30C is going to be a little easier then. At last count there were 523 users of Scan75 (based on downloads). To add SR30C users to the list would be great. HOWEVER! Let us not detract from the OP query of BC125AT vs SR30C (or even the older 75XLT). I...
  10. Scan125

    BC125AT vs SR30C

    Indeed. the 125 has channel name tagging and the 75 not. Not sure about the SR30C as I've not yet dug deeper into it.
  11. Scan125

    BC125AT vs SR30C

    A small assumption here is that the SR30C is the same as the BC75XLT (I believe) except that the SR30C has more channels/banks. Given that then these to pages detail the 125 series and 75 series functions/features in comparable table formats for easy reading. 125 Series Scanners 75 Series...
  12. Scan125

    GMT vs UTC Usage

    Well if I caused a little confusion when I originally started this post in saying " For those who are not sure what the difference is then very simply GMT is a time zone (as is GMT +/-n) and UTC is a time attributed to no zone. Appart from that 22:10:01 GMT is the same as 22:10:01 UTC and vica...
  13. Scan125

    GMT vs UTC Usage

    Well thanks to everyone for your replies. I've looked at my various programs and whilst a simple GMT to UTC text change seems simple it is in fact quite complicated to implement under the covers due to all the logging, automatic saving, time scheduled tuning (HF / DriveR8) etc. Then there is...
  14. Scan125

    BC125AT - 1.05.01 latest firmware - any updated info?

    An update I think you need to make to the BC_VUP software is the ability to SAVE your existing firmware before one attempts to upgrade/downgrade.
  15. Scan125

    ProScan: BC75XLT Programing

    My free/charity ware program Scan75 can program the 75 Series of scanners. Program is fully supported like all my software. Scan75
  16. Scan125

    scan125 and radio reference query

    Hi acerimmer57 Your observation regarding Scan125 and Radio Reference Import from Radio Reference is correct and you did not miss anything. Currently Scan125 does not directly support import from RR but can import RR data in CSV format or from any spreadsheet program that can crease a CSV...
  17. Scan125

    GMT vs UTC Usage

    Yes I think we all like UTC but were you to use a program or web reference source that used GMT would you be pissed off?
  18. Scan125

    GMT vs UTC Usage

    Yes this could be done. After a day of analysing code is dead easy to do 80%+ of the code change. Last 20% is handling what happens with user logs, saved data and ini file settings and field conversions. (Hopefully without breaking anything). What really hurts are all the screen images...
  19. Scan125

    GMT vs UTC Usage

    They are to the extent that the time is the same in both as detailed in my post. No conversion etc required. Mind you so is "color" and "colour" ;) What we are talking about is I guess acceptance, adopting UTC as oppose to GMT, and more accepted common usage. Give it another 10 years...
  20. Scan125

    GMT vs UTC Usage

    This is just a general question about how people feel about the usage of GMT vs UTC, or UTC vs GMT. For those who are not sure what the difference is then very simply GMT is a time zone (as is GMT +/-n) and UTC is a time attributed to no zone. Appart from that 22:10:01 GMT is the same as...
Top