Search results

  1. S

    Muffled Digital Voice Quality

    We are moving to Digital so we can add some of the digital features like GPS tracking and others, that is why we are trying to enhance the voice quality as much as possible and keep the users on Digital. Any suggestions would be appreciated.
  2. S

    Muffled Digital Voice Quality

    Thank you for your suggestions, enabling the Digital Mic AGC will disable the manual Digital Mic Gain and Accessory Digital Mic Gain, right?
  3. S

    Muffled Digital Voice Quality

    Hi everyone, Recently we moved our MotoTRBO radios from Analog to Digital conventional channels, and now we are experiencing a bad voice quality, very muffled and hard to understand sometimes. Below are the main parameters that we implemented. Intelligence Audio Response: disabled Environment...
  4. S

    Interferance between two Digital channels on different Time Slots

    Thank you for the explanation, you are right I didn't get it before, but now it is clear to me that a Digital channel does not work without a talkgroup.
  5. S

    Interferance between two Digital channels on different Time Slots

    We have set a TX Contact for the channel, but didn't set an RX Group List, that is why the channels are working but not using the Talk Groups concept. We have received an official training from a Motorola partner but we are still new to Digital, and that is why I'm guessing that we might have...
  6. S

    Interferance between two Digital channels on different Time Slots

    It is actually still ON because the repeater is on DMM mode, but nobody is using the Analog anymore; but I wonder could there be an interference between Analog and Digital, I means someone on Digital could hear someone PTTing on Analog, or the reverse?
  7. S

    Interferance between two Digital channels on different Time Slots

    The user complaint is that it is happening sometimes and not all the time and I also been testing it and not facing any overlap between the two channels, even so we haven't set Talk Groups at the RX side. So it is probable that this interference is happening at some special case, location or time.
  8. S

    Interferance between two Digital channels on different Time Slots

    We have set the time slots (1 for first channel, and 2 for second channel), but we didn't set a specific talk group, so the talk group option in the channel configuration is set to NONE; could this create a problem? or the time slots should be enough to prevent them from hearing each other?
  9. S

    Interferance between two Digital channels on different Time Slots

    I've read about the promiscuous mode and this feature is only available on non commercial radios, but we are using professional commercial radios so this should not be possible on them right?
  10. S

    Interferance between two Digital channels on different Time Slots

    As mikewazowski mentioned, it is Dynamic Mixed Mode, which lets the repeater to operate on both Analog and Digital at the same time.
  11. S

    Interferance between two Digital channels on different Time Slots

    Actually we did the programming, and we didn't set any group talks, so in the channels configuration the RX list is set to 'None'; could this be the problem?
  12. S

    Interferance between two Digital channels on different Time Slots

    Hi everyone, We have upgraded lately our repeater (SLR5500) from Analog to Digital and now we are on DMM mode and using two Digital channels on this repeater by using different time slots (1 & 2), but with the same color code. Now the users are complaining that sometimes an interference is...
  13. S

    MotoTRBO DP series: Radio Front LED Blinking Green

    Thank you all for the explanations and suggestions, I will make sure to do some investigation to find out what it is exactly.
  14. S

    MotoTRBO DP series: Radio Front LED Blinking Green

    Hi everybody, We are using MotoTRBO DP series radios with VHF frequencies, and the frontal LED is blinking from time to time with Green color even if there was no one PTTing. The scanning feature is not enabled, so what could be the reason that the radio blinks, does that mean it is detecting...
  15. S

    Block reception from a specific radio ID

    This solution is a little complicated for me, but I would still like to give it a try. Can you please share a document or a link explaining it if you have. Many Thanks
  16. S

    Block reception from a specific radio ID

    This method sounds very interesting, but I couldn't find any thread or resource online on how to connect two base-stations together with the rear connectors pins. Can you please refer me to a site or a link? Many Thanks
  17. S

    Impres Battery Charger with Impres Battery Reader

    Thank you for your reply, I know it has been a long time, but I have a follow up question. Is it possible to use this RJ9 port the to connect the charger to the Impres Battery Fleet Management software without a charger interface (CUI)? Many Thanks
  18. S

    Block reception from a specific radio ID

    We are using DMR and both stations are configured with the same Radio ID as you can see in the attached photo, but they still hear each other. Please by ID did you mean the Radio ID in General Settings or another ID? Thanks!
  19. S

    Connecting a multi-charger to Battery Fleet Management

    Hi everybody, Kindly we have purchased the Battery Fleet Management software and we are trying to connect to our 6-units Charger, which is this model: PMPN4283A. Can this charger model (PMPN4283A) be used for this Battery Fleet Management or not? I have been trying to connect to a PC but the...
Top