Search results

  1. N

    SDS100: SDS100 USB Port Cover

    Ok then... I will wait until you tell us if you are going to offer replacements...
  2. N

    SDS100: SDS100 USB Port Cover

    Understood. I will not send you the piece if I find it. Are you going to investigate the method of attachment to the scanner case... possibly an alternate attachment method, or use the same method Uniden uses? It’s the attachment method currently used that is deficient, yes? I don’t know if the...
  3. N

    SDS200 Cloned SDS200's behave differently

    Even when we think all is the same, there are forces unknown by us that can cause differences. To be truly equal in any comparison we first need to start with a Faraday Cage. Faraday Cages are shielded rooms. Meaning a room shielded from all RF, splurious and otherwise. And even then, there are...
  4. N

    SDS100: SDS100 USB Port Cover

    What about if someone sent you a cover that isn't attached to the scanner? Is that all you need for measurements? I think I lost mine in my vehicle, did a quick search but haven’t found it. I’m waiting for warmer weather to do a thorough search... if I do find it I will let you know here in this...
  5. N

    BCD325P2 always on?

    There usually are at least one cigarette lighter outlet or USB port that remain hot when the ignition is off in new vehicles.
  6. N

    SDS200 Cloned SDS200's behave differently

    Used to be something called “birdies”, frequencies that would cause scanning to stop. The scanner was generating an internal signal. It was unintended and they called them birdies. The scanner’s IF could be shifted if any of these birdies interfered with normal operations. I’m wondering if...
  7. N

    SDS100: SDS100 USB Port Cover

    Can a 3D printer make it as flexible/pliable as a stock piece? If so, I could use one also.
  8. N

    BCD325P2 always on?

    There is a workaround... it works, but it’s not the most popular. Leave the scanner on, turn down the volume and turn off the display. It’s doubtful you will run the auto battery down but they make auto shut offs for automotive batteries that disconnect before you loose the ability to start the...
  9. N

    SDS100 battery door clip apologies

    My apologies to all those who experienced broken battery door clips on the SDS100 and reported same here. Up until a couple of days ago I thought the clips were breaking due to rough handling, regardless of any denials. I was of the opinion broken clip reports were not all that fourth-coming...
  10. N

    BCD396T: Dropped!!!

    Looks ok... a magnifying glass might be in order though...
  11. N

    Never been able to pick up anythig with the HP 2

    You should log onto the Texas regional group and ask if there is someone close that could check to see why your HP-2 isn’t playing well. Doubtful it’s an antenna issue but going to RR Forums, regional (listed by states) should find you help to determine exactly what’s wrong.
  12. N

    BCD396T: Dropped!!!

    It’s probably the antenna solder joint. It’s the first thing I’d check. Getting close to transmitter like a CB or ham radio you can listen for will tell you a lot... if you hear the transmission up close it’s probably that solder joint. (Just be sure if it’s a ham radio, use a simplex frequency...
  13. N

    Cloning a micro SD card

    Yup, that was my fear. Instead, I’m going to clone a spare SD card and keep it in the vehicle.
  14. N

    SDS100 cutting out digital transmissions while plugged in?

    That blows that theory... maybe a different wall wart might make a difference. Does it misbehave when the battery is fully charged and plugged into the charger? Or does it only happen when the battery is still charging? You might try a different wall wart...
  15. N

    Cloning a micro SD card

    So, my thinking I may have a workaround for when the laptop was not available won’t work. It was worth a shot. Thanks.
  16. N

    SDS100 cutting out digital transmissions while plugged in?

    Is the radio in the same place and position (standing up or lying down)? It could be that when charging you’ve placed the scanner in a dead spot...
  17. N

    Is the Wi-Fi dongle supposed to come with the BCD536HP ?

    As for using your smart phone to listen and remotely control your scanner take a look at icopyradio.com. It’s a subscription service but it works as advertised. It’s been a while since I used it and don’t know if it caught on or is abandoned but the site is still up.
  18. N

    Cloning a micro SD card

    Can I clone an SD card by the following process? First I remove and replace the micro SD card from my SDS100 AFTER I turned it on and let it boot up, with another SD card from my SDS200, then turn off the SDS100 and let the SDS100 write to the SD card as part of its power shut down? I had to...
  19. N

    Home Patrol-2 Question

    What’s the agency name, your county and state? It helps to see the RR listing parameters, assuming their data is current...
  20. N

    What’s wrong?

    Here is what I found; Nothing to Scan" Checklist Scanner Checklist: 1. A location has to be set in 'Set Your Location' to monitor the Database. 2. You must enable at least one Favorites List or the Full Database in 'Set Scan Selection>Select Lists to Monitor'. 3. Favorites Lists or...
Top