Search results

I do have the ability to reprogram it. We were going to be moving away from tone control anyway so I'd prefer to setup local control.

Not sure what you mean by local, if you mean near the console, yes it is, ill most likely be mounting it to the desk under the console if I can get this to work. I'm new to this consoles stuff, the person who installed all of this passed away last year so i'm playing catch up. How do I tell if...

Hey Everyone, We recently had 2 of our CPI Boxes fail for our Dispatch. Was wondering if anyone has tried hooking up a Zetron 4010 to a Kenwood NX5700 or if that is even possible, and if it is possible what I will need to get it working. Any help is appreciated, Thanks!

Update: I've figured out they are using talkgroups 10 and 11. I think they may be connected? Possibly one is just dispatch and one is units and dispatch? I'm going to have to keep listening. I'm also noticing that they are using both slots, not sure if that's my scanner getting confused or if...

I'm monitoring the following: Northern Lights Ellsworth: 157.65 w/ D114N and i also added another for digital search Northern Lights Dixmont (formerly) Analog: 151.55 w/D114N, now added another for digital search Northern Lights Dixmont DMR: 152.9975 w/ CC14, SL1, TG101 I'm going to keep...

Hey everyone, just looking to see if anyone else is monitoring Medcomm/Northern Lights. Used to get dispatch info over all 3 channels, the Ellsworth one, the Dixmont analog, and the Dixmont DMR. Now I am just getting the tones followed by a warble tone on the Ellsworth one (no dispatch...

Has anyone heard the FEMA Ambulances? One is out of EMMC and one is out of St Joes. Just wondering what frequencies they are using and who is dispatching them?

Hey guys, I'm back to working on this project again. Still having a issue with Transmit Audio being too low, and Dispatch can barely hear us. Anyone have suggestions? Gain is at 8 and that's as high as it will go before it starts distorting badly. Using a M1225 Radio now.

That worked! Thanks for your help

Good Morning, I'm trying to configure our PM400 to work with our brand new David Clark Headset System, but nothing is working. The headset intercom works fine so its definitely a radio issue. We are using a U3805 and a C3821 to connect the system to the radio. Here is the wiring we have right...

I was hoping to be able to turn the knob all the way down to mute it instead of having to shut the radio off. I'll have to check the model of the speaker when I get home. I'm using a VHF Model II.

I'm not seeing it in Radio Wide Settings. Only seeing Minimum Alert Volume which is at 0.

Is there a way to get the MCS2000 to mute when you turn the Volume Knob all the way down? Or is there a way to set a button to mute it? Thanks!

No changes in NAC so far. I'll let you know if they do make a change.

That did help with the volume, although the sound does get distorted/muffled when increasing the amplifier.

Morning all, Got the Signalink setup. Having a few small issues: Audio coming out of a radio listening to the transmission from Zello is quiet, when we try moving the jumper to increase the audio output, it gets distorted. Anyone have any ideas?

Looks like we are going to be using a SignaLink, ill let you guys know how it goes.

We are trying to use a SM50

Hello all, I'm trying to setup a 16 pin Motorola to work with Zello. I'm trying to figure out if I need to connect the PTT wire from the connector to something from the computer to make it transmit or if the radio will transmit when it hears audio through the Mic Audio. Thanks for any help!

Ok, may end up just ordering one of those if you think it will fix the problem. I'll get in touch with the guy who has keys to the radio tower and see what we currently have.