Search results

I don't know if this will help. A number of years ago they purchased type 2 Motorola radios for the bus fleet and operated it as a hybrid system. The talkgroup was 16528. Looking at my Sentinel software it looks like I simply entered the talkgroup (as an analog talkgroup) in a new Dept...

I would gladly do so if the playlist contain more than 20 talkgroups. Unless there's some way to increase the number now.

Use any cheap USB sound card from Amazon plugged into the Pi with audio cable from it to the 3.5 audio out on the SDS100.

I used an extra Raspberry Pi 3 I had laying around.

Using a Raspberry Pi, this is how I do it: Raspberry PI system audio streaming over the network

I have a Pi 4 ready and waiting.....

Thanks for giving me additional ideas to approach. I failed to reboot the WiFi router (I know, should have been high on my list). All is functioning well now. I didn't think the router might be an issue because OpenMHz was uploading fine. The only info I was able to pull off the log was...

Hope this is the right forum, All of a sudden in the middle of the night at the same time all three of my Broadcastify Calls nodes stopped uploading the audio files. All came back with an error of "Broadcastify Metadata Upload Error:" or "Plugin Manager: call_end - broadcastify_uploader...

I'm not going to be able to help you but I will encourage you. I have about a dozen of these little pi's, half of them are 4s. I've had the same problem using VNC with the 4s and was able to resolve it by continually changing the screen resolution until it remained connected after reboot. I...

Same problem here. One of my traditional feeds has all the archives but the other one no archives for the last couple days. Just figured they were resolving it. No recorded audio here -- Grant County Fire/EMS and Washington State Patrol Audio Archives

Keep your traditional feed and add the new Calls feed with another Raspberry Pi. You can't have too many.... Unless the 9 I have are too many? In other words, these things are fun to experiment with.

This is what I found that worked. 1) Open Terminal Click on the Terminal Window. 2) cd /usr/bin sets target directory (actually changes directory.) for cp (copy) command. 3) sudo cp lxterminal xterm It makes another copy of "lxterminal" and re-names it to "xterm" (old terminal) so you can...

Here are a few I'm monitoring to see if some of the frequencies/info changes before submitting to data admins. Sysid RFSS Site Name County Freqs 03E 92 (5C) 092 (5C) Beezley , Grant , 771.98125a 772.43125 773.18125c 773.43125 03E...

I noticed this morning all of my playlists in the calls platform no longer work, all that comes up is "No Calls Seen in the Past 10 Minutes". I created a new playlist and I get the same results. I'm hoping something is going on in the back room with the developers putting the last finishing...

Yep, had the same problem with the Baofeng UV-5Rs on Broadcastify. Using a mixer with base/treble control seemed to help.

(See below) http://forums.radioreference.com/threads/classic-feed-from-calls.408138/post-3320695

I am of the belief there are multiple simulcast repeaters.

I did hear back from an electronics tech with the Yakima City radio division. This was his response. "Thank you for the information. I am not the radio tech, he is out on leave. We have been to every site troubleshooting this issue to no avail. We had contracted outside help for yesterday, but...

Before I retired from the Yakima Fire Dept, I was stationed at the Yakima Airport on crash fire rescue equipment. We would regularly get A6 and A6E's that would be going to and from Naval Air Station on Whidbey Island to Boardman Oregon for practice bombing runs. They would routinely make...

Has anyone else noticed for the last month or more a constant key up on the Yakima Upper Valley Fire frequency 154.2575? This event started a couple of months ago but was resolved a few days later. However, this recent event started over a month ago and has continued. It does have the normal...