Search results

Max, I sincerely hope that you did not perceive my post as a criticism of either your work, or anything related to the OP25 project, because it wasn't meant to be this. Since english is not my native language, I may have not used proper phrasing, and I'm sorry if it was perceived as that. I'm...

Except for the "listeners" one, are these http POST commands still valid, especially the "status" one ? I would like to embed audio player to display the stats of my feed in another language; display "En ligne" instead of Online, "Hors ligne" instead of Offline, etc. Guess I could scrape the...

I've tested D-Star decoding and it works. Wondering if there are arguments or parameters I could try to optimize the audio quality. Will have to check thru code to see if I can find something. Anyhow, the D-Star protocol audio quality is not very good to begin with, compared to DMR or Fusion...

Thanks to both of you, I'll test this and will post back results

I've configured a 2nd dongle for the reception of the D-Star local repeater with multi_rx.py. But I've tried several parameters in the json file, and cannot make it decode D-Star. I know there is a bug in D-Star decoding in op25, as KA1RBI stated, but does somebody know what is the nature of...

Thanks for the update, Max. Any ETA on that fix ?

Yesterday, had to order something on Amazon for my youngest son (some figurine we can't find locally), and have decided to order a NooElect dongle at the same time, so that I can use 2 instances of rx.py instead of multi_rx.py, since it's probably the different filter_type needed for both modes...

Thanks, that part is working now. Everything was already configured as such, but only had to change the udp port for the 2nd stream for 23460 instead of 23458 As for the reception and decoding of 2 signals at the same time that are encoded with different protocols (ysf and D-Star) with only one...

In a update f my situation, got authorized to stream on Broadcastify the audio of the local D-Star repeater. The audio of the C4FM/Fusion local repeater was already setup and working nicely. Since both repeaters were 2,17 MHz apart (144,95 and 147,12), I wanted to use multi_rx.py so that I...

You're probably right. However, with the rtl:0 thing, the error message I was getting was ValueError: No JSON object could be decoded. The seg error, double list corrupted, and such, were received a while back, and with another json for multi_rx. And after recompiling the way described, and...

Did some tests and is working nicely ! I was able to apply up to 10X without distorting things much. Does the job well, thanks so much for that

Was not working at all after compilation. Did not get any error messages while compiling, but was having segmentation faults, double linked list corrupted errors and such everytime I was trying to run it after that. Only when I did the steps above, the program ran after that without errors...

I confirm the link above dseven sent you. I was having similar errors. The only way I was able to successfully compile OP25 on a RPI was this way`: sudo apt-get update sudo apt-get upgrade sudo apt-get build-dep gnuradio sudo apt-get install libboost-all-dev liblog4cpp5-dev swig cmake gnuplot...

Wow ! Thanks Boatbod ! You're the best ! Was able to redo everything after a couple of hours, but did not get the updated code. I'll do the git pull tonight and will post back results. I owe you a couple of beers !

Did a lot of experimentation today. Was not able to enable mixer control for the loopback device. Also, read that pavucontrol would allow increasing the volume levels up to 160%, so I tried this, which has installed pulseaudio, and it screwed everything... Before that, I didn't even need to...

Searched if something could be doable in ALSA, and apparently a "preamp" type cursor could be added in asound.conf, to add a volume cursor in alsamixer, that would allow to amplify the pcm signal up. Sources ...

It works. Audio is heard on the stream. Nice ! Only thing is that the audio is a bit low. I've made sure everything on all sound cards were at 100% in alsamixer, but audio is still low. I believe you once said in a reply, that nothing could be done in OP25 as for audio levels. However, I...

Ok thanks, will test this and post back results. Thanks

I'm using multi_rx.py with a json file, since I want to monitor 2 local ham repeaters (one DStar and one Fusion C4FM) which are 2,17 MHz apart. Command line is: ./multi_rx.py -c DIGITAL.json -v 9 in the /home/pi/op25/op25/gr-op25_repeater/apps directory. Content of the DIGITAL.json file: {...

As stated in the other thread, I've done some tests. I'm using multi_rx.py with a json file, since I want to monitor 2 local ham repeaters (one DStar and one Fusion C4FM) which are 2,17 MHz apart. Using a RPI 3 with a fresh Stretch install. Both services are confirmed working, snd-aloop...