Search results

  1. C

    ICOM F21 "beep"

    Radio in charger, turned on and trying to transmit and getting BEEP> YES YES YES BAD BATTERY People just due not under stand that keeping a radio in a charger all the does not keep the battery charged. Unless you have the very high $$ SMART CHARGER, (that WILL not due NiCad's) then when the...
  2. C

    Motorola CP185

    I agree with elroy about the CP185 being on the low end of the scale. With that said, the same cable that is used for the CP200 is used for the 185. Software is still available at MOL for$265.00. Part number is RVN5194 Cable is available on ebay.
  3. C

    Squelch CM340

    Also, CPS R5.16 is a very old version of software. You need 5.18 to be current
  4. C

    Motorola R1225 almost No Receive

    Unless you find some thing on ebay, parts of any kind are no longer available for the 1225 series radios. Upgrade to a different system.
  5. C

    Zetron Model 15B Manual

    Have you made contact with Zetron? They may have one in the history file.
  6. C

    TK3101 programming to 2 watt

    First off, in order to correctly set power level, you need software, and a power meter, prefer a FM service monitor. Second, changing power levels on a per channel basis is some times tricky depending on how you do it. For the most part you can have different power levels on different channels.
  7. C

    Local Icom repair shop

    What are you problems with the radio? Any Icom dealer normally will be able to make minor repairs on any Icom radio. Worse case, send it into Icom for factory level repair.
  8. C

    Antenna for multiple FM transmitters

    If you are located within the USA, then you will not be able to legelly do what you have indicated you wish to do. Any AM or FM radio station working in the low power range( 100 milliwatts or less) per FCC can only cover about 1/4 mile max (if that). Any thing else requires a FCC license and a...
  9. C

    Monitoring WSP on IWN

    If you are in the Seattle area, then YOU WILL NOT GET ANYTHING FROM SPOKANE, NO WAY.
  10. C

    Recognise this connector?

    As prcguy stated, that connector is used on Cable tv hard line. Look on the barrel and it should be stamped with some thing like 500, 625. That tells you the size of the cable it fits. There are 'F' adapters that the pin and are made by Gilbert Industries in Arizona. I used to work for the...
  11. C

    VX-2200 Horn Alert

    Get a small relay, connect one side of the coil to any pin 9-12, the other side to pin 15. Program the pin 9-12 to active on alert. Connect the contact side of the relay to what device you are trying to activate.
  12. C

    Laptop Freeze When Programming CDM1250

    I would bet that your problem is the wrong version of the software. You should be using 6.12.09.
  13. C

    Interfacing Zetron 4010 and Motorola/Kenwood Radios

    You can more information and wiring connection guides by contacting Zetron directly. customercare@zetron.com 877 284 4616 (press 3)
  14. C

    Kenwood: Kenwood TM-V71A narrowband

    Guess I have to ask. Why are you worried about narrow band mode on a ham radio? Do you have narrow band HAM Frequency's in your area? Narrow band only needs to be used on commercial frequencies.
  15. C

    WHY!?

    h You know write english well. Hard to figure this out. But I think I finally got it. Question, how many devices on the business side of the system? How many wired connections on the gust side? How many wifi access points on the gust side? Is the gust side open or password access? How...
  16. C

    IC-2020 narrow band?

    There is a column that says w/n, hilite it and press space bar and it will change to n for narrow.
  17. C

    TK-790 KPG-44D Programming Guide

    You should be able to highlite a field then press F1 and the help for that item will show.
  18. C

    200+ Channel NXDN Capable Radios To Monitor Railroads

    First off, where do you get or see 200 channels or frequencies? The North American Railroad system to include Canada, work in the frequency range of 160.110 to 161.565 and each channel (frequency) is 15khz from each other. That comes to 97 channels. Example: here are the first 10...
  19. C

    Tk-360 manuals inquiry

    Have you tried a general internet search for the user manual? As for the service manual, you need to remember that this radio has been out of production for many years so finding a manual will be hard, You may also try going to mods.dk as they have a lot of manuals, you may have to build an...
  20. C

    Motorola Syntor X9000 programming

    A code plug (or data file) is ALL the information that is programmed into the radio to make it work, this includes frequency's, tones, scan lists, quick keys. Now, ANY time you are going to do any thing with a radio, the first thing you do is connect to the computer and then READ or DOWN LOAD...
Top