Search results

Below is a message I am getting when I run on my raspberry pi Allstar node which is how things get uploaded. ezstream: Warning: /etc/ezstream.xml is group and/or world readable ezstream: Connection to http://audio3.broadcastify.com:80/dst8rcqv97gy failed: L ogin failed ezstream: Exiting ...

Yeah, TOR is high and PTT low

OK I do have some ferrietes on just for the heck of it. But I guess the rest I would need more info about.

I have a 6110 hooked on the link port of a CAT-200 controller. Not always does it happen but more times than not after it transmits. It only seems to do this as a link radio. If it is ona repeater pair, it may do it a couple times after the repeater that its listening to unkeys which causes...

This is how my TK-8180 repeater is set up. The rear DB25 is used. DB25 Radio to ID-O-Matic IV Pin 4 Ext PTT Voice > Pin 3 PTT Pin 22 TOR > Pin 7 COR Pin 17 RX Audio > Pin 8 RX Audio Pin 6 Audio Out > Pin...

I don't think there is a need to point and scold as arrogance ruins forums like this. The information that was being passed back and forth was simply information of what I am using. The KPG111D Version 4.80 is what I use for my NX-210G as you can see in the screen shot I attached so it...

OK Thank you, sounds like it would take some thought and further research. I was wondering though about in the extended function on the X180's in the mod line part where it has w/QT/DQT - what does this do or would it do if it was made No. I wasn't getting a good answer when I looked it up...

Mine has 4.74.00

Hello, I know some radio like the GR-1225 has a PL strip to eliminate hearing the id etc on a repeater. Other repeaters do it also. How is this done? Basically to only pass audio. I have a couple tk-8180 repeaters using an Id-o-matic 4 and a VHF TK-762G repeater with a CAT-300 controller. I...

111D is what Ive been using on my NX-210 with no problem

I have a TK-2180 and my workplace just put in 2 repeaters and it seems to decode them but not getting into them. My other radios work fine. I was trying to figure out if it is the PL tone or what. The PL's are 103.5 and 127.3. It works on other repeaters just fine. I use it for ham also and...

OK. I'll give a try at some point. Thanks again!

OK. I have both the 7180 and 8180 that I would like to try this with. What is the easiest way I can do this?

So the Sens1 and Sens2 adjustments are not as easy as the 2180 and 3180?

OK Thank you. I have a couple of those plugins. I had just thought maybe Phase II and the scanner feature might be available and I overlooked figured they would be popular features. Thanks again!

I'm new to the SDR but I havent found yet how to use it as a scanner. Is there a plugin that I havent found yet? When I say a scanner, I mean like how a scanner works where you have the frequency in a channel and can actually scan select frequencies. Also P25 phase 2, is this available...

OK Thanks. I tried it this way before but it turned out the wires color code of wires wasnt matching the pins. So disregard the colors I mentioned, it turns out the double sides male cable I bought and cut in half the colors didnt match with the diagram I was going by from the internet. I now...

I have two TK8180's that I want to make a repeater into. I have a ID-O-MATIC IV. I seem to be having a little issue getting it all to work. This is the what I used..... http://static1.1.sqspcdn.com/static/f/1281716/16744537/1329933072963/AN246.pdf?token=T2LZxGDZtcfXJZmH%2BQ7Hw%2B98wAI%3D...

I have a idomatic 4 and two 8180's that I am looking to hook together as soon as I get all the info straight. First time doing so if any cut and dried simple steps would be great!

yeah UHF/UHF repeater (not crossband). I would probably have to disconnect a couple wires on the receive radio so it wouldnt try to talk on the input frequency if someone talked on the output of the repeater. I have found a few ways that people have wired them using different pins but I would...