Search results

Question with your setup on site roaming do you have any voters tied to repeaters in the area? Thank you, Richard

Please see information below.. The system just hung again..

They are all connected via private network, either dark fiber or microwave links.

I have a 5 site roaming system and randomly the main repeater for the system locks in transmit and site roaming stops working. If you read the repeater remotely everything comes back online. Any thoughts or suggestion on settings? Thank you.. Richard

I did look at the line up for the repeater and the main repeater is listed first and the additional ones are listed below. Under the setup on the portables the system is selected as "Site Roaming" should I be use "Site Roaming with Ran" ? I don't have something configured correctly on the...

Thank you. I have done our firmware mostly remotely. All of our sites are either linked by fiber or point to point links by Cambium and the ping times are decent. I’m going to replace the kti-3 at that site its a hit or miss sometimes, but the audio getting transmitted sounds like a robot...

I can read and write via the mic port on the repeater. I can read only from the KTI-3 box via the network. I can not write to the repeater via the network or do the firmware upgrade via the network. I did the local firmware update locally on the box and now i can read and write via the...

Over the weekend I experienced a problem with our or Kenwood NXR-710 repeater sites connected to site roaming. The area that was affected called and advised that they could not transmit and they were not receiving any radio traffic. Looked at the system had it showed all sites up and running...

Thank you for the information I have the sites listed in both the group site list and channel edit. It seems to be working I wasn’t sure if there was a right or wrong way of doing it.

To the users running NXR-710 repeaters with voters. I got a question regarding the configuration on the system. On the main repeater under Edit --> Site Group Table all the sites are listed and have a check box under the unicast site list. On the voter sites under the site group table for...

Hi Wayne, Having all the links coming to one cell modem isn’t the best practice. Is there a way to send all the modems back to a different VPN end point that has better internet connection? With my sites they do have backup connections over cellular modems but the vpns go back to a...

Wayne - I am running almost the similar setup with some of my sites. A couple of questions on your head end were all the VPN's connect back to what type of connection is that? Ie Cable Modem, DSL, or another cell modem? Who is your cell network provider for the cell modems? Richard

Hi Wayne, Are you doing site roaming or voting or a little of both? I currently have 1 central repeater in place with 8 remotes repeaters in voting status connected via network ie p2p links or cell modems with a vpn connection. I am currently in the process of...

So a little blonde moment here. Under the Channel edit --> Network Setting I forgot the click the Conventional IP network box.. Once I did that and wrote the programming everything came up like it should. I did some testing today on portable and it seems to work fine. If this goes well I...

Thank you and Happy Anniversary.. Those are the settings I have in place currently. Under the site roaming section, what do you have for host repeater? Thank you, Richard

Thank you

Hi Folks, I am trying to get site roaming setup with two NXR-710 repeaters. Both repeaters are connected via network. The main repeater does have a couple of nxr-710 voters networked back to it and they work fine. Installed the second repeater and followed the help guide for multi site...

With our current voters they are NXR-710 repeaters set in voter mode and they have the KTI-3 box attached to them. From there the are network backed to the main repeater. The network that they are built on has redundant links and overall the system works well on voting.

If the NXR-710 are still available I will get one for the new site and that's a cheaper option. With bringing up a new site and connecting it to the network via KTI-3 interface and setting it up as NXDN site roaming with the main repeater. Will the current 8 voters that are currently...

I would like to thank everyone for there input on this matter. From the sounds of it I need to stay away from simulcast and go with NXDN Site roaming with IP connectivity between the two sites. With this being said I would need to buy a repeater, should I buy a NXR-5700 for the main repeater...