Search results

  1. W

    Pro-668: Manually add a TG without software

    Spend the money and send it to whistler for the legacy upgrade, that will make it whistler WS1080.
  2. W

    Pro-668: Manually add a TG without software

    Read this thread....https://forums.radioreference.com/threads/whisler-trx-1-manual-programing-a-talkgroup.395980/
  3. W

    Pro-668: Manually add a TG without software

    Search Youtube videos for the trx-1 the process is exactly the same.
  4. W

    TRX-1 mute?

    If you have the skip button set to skip, Press it. it will then skip it until you reboot or go into the menu and select "restore skipped"
  5. W

    Dual RTL-SDR V3 & V4 to monitor P25 - Setup help

    There is a learning curve, as there is with any new electronic device...IMO: learning new software is frustrating at times, so you take a break, Come back with a different mind set and get right back at it until I figure it out! That part is very rewarding!
  6. W

    TRX-1: TRX-1 runs for awhile then displays error detected

    More than likely your card is failing. Sometimes when windows won't fix the card, I bring them back using a device to format such as a digital photo pic frame or camera, android tablet etc...but more times than not, they need to be replaced.
  7. W

    Buffalo Police Only (Erie Co. ).....Audio Feed

    There are now separate feeds up for BPD Ch 2 , 3 and 4)
  8. W

    Trouble with my 3 separate Buffalo PD district feeds

    Finally, I have them all streaming without using a very expensive scanner.
  9. W

    Trouble with my 3 separate Buffalo PD district feeds

    Not sure I am following 100% I'm failing miserably!
  10. W

    TRX-2: DSP Firmware Update Stalled

    Yes it could be a bad usb cable or connection. My understanding is the config.bin file on the sd card contains the DSP firmware and you can roll it back by changing that file. It loads when the scanner boots up.
  11. W

    TRX-2: DSP Firmware Update Stalled

    Probably a SD card issue, as DSP firmware get written to the SD card. Use a card reader, In ezscan select prepare card and check all the boxes. if the card will not format replace it with only a SANDISK class 4 card 4, 8 or 16gb ...what ever is least expensive.
  12. W

    What Should I Do With My Defective TRX1? Any Suggestions?

    Are the configurations clones? if not make them clones, then Swap cards, and antennas and see if the problem follows the cards and antennas, then just swap the antennas...Let us know what happens. You can always send it to whistler to be fixed at your expense.
  13. W

    Whistler TRX-2 Availibility

    Get a SDR dongle and repurpose and old computer.
  14. W

    Trouble with my 3 separate Buffalo PD district feeds

    Ok, then help me understand why I can't hear BPD Ch 2 on broadcastify unless I have the radio identifiers turned on? but I can hear them just fine on the PC?
  15. W

    Trouble with my 3 separate Buffalo PD district feeds

    Still need help getting the other 2 stream to work with Broadcastify. If I set the identifier to Radio Identifier 1 to 16777215 like ch2 , I get a identifier conflict error.
  16. W

    Trouble with my 3 separate Buffalo PD district feeds

    I changed some stuff, I have BPD CH2 working correct on Broadcastify. I gave it a Radio Identifier 1 to 16777215. Ch 3 and Ch 4 there is nothing on broadcastify, but it is working in sdrtrunk on my PC.
  17. W

    Trouble with my 3 separate Buffalo PD district feeds

    Please walk me through this? as I do not see any Talkgroup options under the channel tab. I have system, site, and name.
Top