Two feeds going out onto one

[melbournefan]

Hi,

When I started broadcasting onto another feed one analog and one digital, the analog feed is getting the audio from the digital feed.

What I am using for the analog feed is VB audio cable from SDR # to ScannerCast.

For the digital feed I use a aux cable to the line in jack on my PC.

Can anyone help?

 

[mikewazowski]

Moved, not a Broadcastify issue.

 

[M105]

Hi,

When I started broadcasting onto another feed one analog and one digital, the analog feed is getting the audio from the digital feed.

What I am using for the analog feed is VB audio cable from SDR # to ScannerCast.

For the digital feed I use a aux cable to the line in jack on my PC.

Can anyone help?

Can you explain the problem a little better?
Audio setting in SDR# should be VB Cable input.
Audio source for feed 1 should be VB Cable output.
Audio source for feed 2 should be Line-In.
Uncheck the 'Listen' box on all your recording devices under properties.
Mute the unused stereo (left or right) on the audio feeds by setting the volume to 0.
Disable/mute any internal microphones.

 

[melbournefan]

So I fixed it by unchecking the listen box on both inputs.

Thanks