125AT BC125AT display question.

[Yocuz]

I recently started using a Uniden BC125T scanner for local VHF/UH Civil and Mil air bands. I can't seem to find info on the display screen output to the right of the signal bars when adjusting the volume. I assume it might be battery/voltage level but am not sure. Can anyone fill me in?

 

[doctordialtone]

I assume it might be battery/voltage level but am not sure. Can anyone fill me in

Did you check it out in the MANUAL?

 

[Scan125]

When you press the Scroll Knob down to adjust the volume the top right corner of the display shows the current battery voltage.

If you have not tried Scan125 Control Program (free but please donate to charity) then you may want to give it a whirl/go. If nothing else the programs user manual will help clarity much of the poor points in the Uniden manual.

Any yes Scan125 will show you your battery voltage/charge status.

 

[Yocuz]

Did you check it out in the MANUAL?

View attachment 82546

Dr. Dial tone I did check and saw the same gfx you have attached. It to does not reference the display I was inquiring about.

I see from additional messages it was a voltage reference.

Thank you.