• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

2011 Jeep GC

Status
Not open for further replies.

kb2ztx

Member
Premium Subscriber
Joined
Jul 29, 2012
Messages
506
Location
South West Virginia
Has anyone tried a console from a durango in one yet ? I like the console havis sells - Part # C-VS-1500-DUR-1

The Jeep GC and Durango are very similar inside and it appears it will fit. Just concerned about the shifter location.
 

newsphotog

Member
Premium Subscriber
Joined
Jul 29, 2008
Messages
883
Location
Des Moines, IA
I e-mailed Havis about that and said it would not fit the 2011-2013 Grand Cherokee.

Plus, and I don't know about yours, but I have an air duct and power inverter on the rear of my center console. I saw pictures of the rear of the Havis console and it would not allow for that.

I e-mailed all of the major console manufacturers and either they said they have no plans to make a console for the Grand Cherokee since they're not "typical fleet vehicles" or I did not receive a response at all.
 
Status
Not open for further replies.
Top