2016 NC State Fair Monitoring

Status
Not open for further replies.

N1GAW

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
1,750
Location
Raleigh, NC
It's time again for the NC State Fair!

NOTE: To monitor the NCSHP Training Center or West Raleigh VIPER Site during the NC State Fair you must have a digital scanner capable of following 700Mhz Sites!!!

For those with scanners the following digital Statewide Event talkgroups on VIPER will be used for this years NC State Fair:

Statewide Events Echo 1 (TG 51971)= LE Interior Ops
Statewide Events Echo 2 (TG 51972)= EMS/Fire Ops
Statewide Events Echo 3 (TG 51973)= Dorton Arena
Statewide Events Hotel 2 (TG 51984)= Special Incident
Statewide Events Hotel 3 (TG 51985)= SHP Traffic Posts

And on the Wake County System the following will be used:
Wake PS Event 5 (Analog TG 26800) = Fairgrounds staff

NC Dept of Labor Ride Inspectors have been monitored using the callsign ROBERT-IDA (Ride Inspector).

An online feed of the State Fair this year is being broadcast on my RDU Public Safety Feed:
Raleigh Durham Int. Airport Public Safety and Airport Ops

On the feed I've also added Dept of Agriculture and State Fire Marshalls. After the fair the RDU feed will return.

Here's the link copy of a traffic "post" map from years past. I believe it should be pretty accurate for this year as well.
http://qsl.net/ke4znr/NCFair/NCSHPStateFairPost.pdf

Any updates, questions, or issues please send me a message. ENJOY!!!!
 
Last edited by a moderator:

N1GAW

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
1,750
Location
Raleigh, NC
Finally did hear the ride inspector on the radio, using call sign ROBERT IDA. They were using normal channels for LE.
 
Status
Not open for further replies.
Top