2021 NC State Fair Monitoring Guide

Status
Not open for further replies.

RaleighGuy

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
13,304
Location
Raleigh, NC
It's time again for the NC State Fair! Opening day is today, THURSDAY, October 14th. This year there will not be an audio feed on Broadcastify.

NOTE: To monitor the NCSHP Training Center or West Raleigh VIPER Site during the NC State Fair you must have a digital scanner capable of following 700Mhz Sites!!!

For those with scanners the following digital Statewide Event talkgroups on VIPER are in use for NC State Fair traffic:

Statewide Events Foxtrot 1 (TG 51975)= LE Interior Ops
Statewide Events Foxtrot 2 (TG 51976)= EMS/Fire Ops
Statewide Events Foxtrot 3 (TG 51977)= Dorton Arena
Statewide Events Foxtrot 4 (TG 51978)= SHP Traffic Posts
Statewide Events Golf 1 (TG 51979)= Special Ops
NCSFMAIN (TG 52071) = Fairgrounds staff

And on the Wake County Type II System the following is being used:
Wake PS Event 5 (Analog TG 26800) = Fairgrounds staff/Non-Sworn personnel

You may also hear traffic on Dept of Agriculture (51601-51608) and State Fire Marshall's (52046-52050) Viper talkgroups.

NC Dept of Labor Ride Inspectors have previously been monitored using the callsign ROBERT-IDA (Ride Inspector) and heard on normal fair related talkgroups.

The NC State Fair website is at 2021 N.C. State Fair - Worth The Wait!

A map of the fairgrounds can be downloaded at 2021 State Fait Map (PDF)

Here's the link copy of a traffic "post" map from years past. I believe it should be pretty accurate for this year as well.
http://qsl.net/ke4znr/NCFair/NCSHPStateFairPost.pdf
 
Status
Not open for further replies.
Top