396T 900-930 custom search

Status
Not open for further replies.

adams6451

Member
Joined
Nov 13, 2008
Messages
50
Location
Tennessee
Hello all,

When I did a custom search with 900-930 earlier this year I could turn the squelch down and the scanner would stop without pressing hold.You could simply turn the volume button on each frequency and here static, that is simple. I did a ARC396Pro Bandscope Sweep on the custom 900.0000-930.0000 frequencies and now the scanner will not stop on any frequency in that Custom Search unless I press hold and then I hear static. All the other Custom Frequencies will hold with the squelch turned down?
 

adams6451

Member
Joined
Nov 13, 2008
Messages
50
Location
Tennessee
No the "set c-ch only" off
"delay " 2 sec
"modulation" auto
"attenuator" off
"data skip" off
"step" auto
I do not understand, it was just fine before the Bandscope?
 

adams6451

Member
Joined
Nov 13, 2008
Messages
50
Location
Tennessee
Sorry I forgot to mention that in the custom search mode it is still not squelching down and holding but that is ok there because you can hit the hold button and get static on 0 squelch and manually turn the dial.
 
Status
Not open for further replies.
Top