tampatracker
Member
- Joined
- Dec 9, 2007
- Messages
- 1,244
- Reaction score
- 35
When programming this system ;
Location: Tampa, FL
County: Hillsborough
System Type: Motorola Type II SmartZone
System Voice: APCO-25 Common Air Interface Exclusive
Last Updated: June 1, 2008, 11:32 am (Tagged 5 Talkgroups with (Military))
Custom Frequency Table
Base Spacing Offset
406.5625 12.5 380
System ID List
System ID Connect Tone
B112 138.46
System Frequencies
Red (c) are primary control channels | Blue (a) are alternate control channels | Site Map(s): FCC Callsigns RR Locations
Site Hex Name Freqs
001 1 Site-1 406.56250c 406.76250c 406.96250 407.76250c 408.16250
What are the settings I should have set into Freescan to properly monitor this system? Currently the type is MOT Type II/ P25 with the site set as Mot UHF, and with this setting I get most of the conversations, but I'm wondering are these the correct settings? I hope this is enough info, I couldn't think of any thing ele to include. The system name is deleted as it's a military system and there have been issues in the past that they wanted to pull their system info off RR as per exposure but relented. I don't want to ruffle their feathers. PS With the site set as MOT Custom I get nothing. I'm fairly new at dealing with P25 type systems, any input would be appreciated, thanks in advance.
Location: Tampa, FL
County: Hillsborough
System Type: Motorola Type II SmartZone
System Voice: APCO-25 Common Air Interface Exclusive
Last Updated: June 1, 2008, 11:32 am (Tagged 5 Talkgroups with (Military))
Custom Frequency Table
Base Spacing Offset
406.5625 12.5 380
System ID List
System ID Connect Tone
B112 138.46
System Frequencies
Red (c) are primary control channels | Blue (a) are alternate control channels | Site Map(s): FCC Callsigns RR Locations
Site Hex Name Freqs
001 1 Site-1 406.56250c 406.76250c 406.96250 407.76250c 408.16250
What are the settings I should have set into Freescan to properly monitor this system? Currently the type is MOT Type II/ P25 with the site set as Mot UHF, and with this setting I get most of the conversations, but I'm wondering are these the correct settings? I hope this is enough info, I couldn't think of any thing ele to include. The system name is deleted as it's a military system and there have been issues in the past that they wanted to pull their system info off RR as per exposure but relented. I don't want to ruffle their feathers. PS With the site set as MOT Custom I get nothing. I'm fairly new at dealing with P25 type systems, any input would be appreciated, thanks in advance.
