LOf674
Member
I have recently purchased a refurbed model off of ebay with the firmware version of 1.08.14. Now, it loads and communicates fine with arc-xt pro, but for some reason the updater will not work. It gives me a "programming error" then mentions that it should be connected with the and standard cable and the power source should be kept in at all times...
Any ideas? The cable seems fine uploading and downloading to arc... power is obviously on...and there appears to (appears) be no conflict with the other com-ports as I am shutting down arc-xt then running the updater with the same com-port assigned.
Oh and curious, there is a setting for the P25 adjust in the settings menu...so I was able to change the number like the wiki instructed...
Any ideas? The cable seems fine uploading and downloading to arc... power is obviously on...and there appears to (appears) be no conflict with the other com-ports as I am shutting down arc-xt then running the updater with the same com-port assigned.
Oh and curious, there is a setting for the P25 adjust in the settings menu...so I was able to change the number like the wiki instructed...