• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

6.25khz for NYC

Status
Not open for further replies.

SKYNET156

Duplicate account of Tom Sherman
Banned
Joined
Mar 14, 2009
Messages
0
Location
Orange County, CA
I am looking for a good radio with 120+ channels for NYPD/FDNY/EMS, Ect, for RX only, and GMRS and Notification TX, i am looking for a good radio with 6.25khz spacing to cover all those services,
I am looking for a radio recomendation, the radio has to go above 482mhz, so i am looking for 450-512mhz, also it must have 120 or more channels and 6.25khz channel spacing to support the new FDNY/EMS channel plan, and support a surviellence ear peice,

I was looking at an EX600, XTS3000 and HT1250, I am not too concerned with P25,
 

bezking

Member
Database Admin
Joined
Aug 5, 2006
Messages
2,634
Location
On the Road
The 1250 won't do 6.25, the lowest it goes is 12.5, and I would therefore assume that the EX600 is the same. Can't say I know for the XTS, though.
 
Status
Not open for further replies.
Top