996P2 TDMA

Status
Not open for further replies.

jdepalm1

Member
Premium Subscriber
Joined
Dec 20, 2005
Messages
56
Location
Monroe County, New York
Hello I am trying to program a phase 2 trunking system into my 996P2. I am not sure what I am missing but it is not working!! I have the latest firmware and I am using the ARC XT software. I have spend countless hours on this and ideas will be greatly appreciated.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
15,759
Location
BEE00
P25 Standard is the correct system type, that covers both Phase I and Phase II.

Chances are you're having issues due to the simulcast nature of the system, not necessarily your programming. Do a search for simulcast distortion and you'll find countless threads discussing it.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
15,759
Location
BEE00
I am not familiar with ARC XT but I would experiment with different Phase II system types.
There are no "different Phase II system types", it all falls under P25 Standard in a Uniden scanner. And no, X2-TDMA is not the same as Phase II, and should not be used. X2-TDMA is extinct at this point.
 
Status
Not open for further replies.
Top