996T Denver ESK - Not getting talkgroups

[iamthatguy]

I've ran the ESK firmware update but can't get Denver to come in reliably. The signal shows 5x5, but I only get a couple of my 185 programmed talkgroups. (I programmed them all when programming a few didn't work)

Any ideas? Here are some stats from the USAD program...

System: EDACS
Site: EDACS Wide
ID Format: ASF
Frequencies 856.4875, 855.9875, 855.4875, 854.9875

Example of talkgroups (185 are programmed from this website)
DISTRICT-1 04-025
DISP-1A 04-030
DISP-1B 04-031


Thanks - Hank

 

[scanlist]

You are missing 15 frequencies if that's all the frequencies you have in the scanner. Denver PS is a 20 channel system. All frequencies by logical channel are listed below.

LC01 854.9875
LC02 855.4875
LC03 855.9875
LC04 856.4875
LC05 857.2375
LC06 857.7375
LC07 858.4875
LC08 859.2375
LC09 859.7375
LC10 860.4875
LC11 855.2375
LC12 855.7375
LC13 856.2375
LC14 856.7375
LC15 857.4875
LC16 858.2375
LC17 858.7375
LC18 859.4875
LC19 860.2375
LC20 860.7375

 

[scanlist]

Also the district TG's are

04-021 Dispatch 1
04-041 Dispatch 2
04-061 Dispatch 3
04-081 Dispatch 4
04-101 Dispatch 5
04-121 Dispatch 6

Check your talkgroup numbers against the database as well.

 

[iamthatguy]

Thanks for your help guys, the frequency thing did it. I thought only control channels were needed and the other frequencies would automatical be pulled in.

Thanks - Hank

 

[jimmnn]

Hank your confusion may have arisen with the fact that control channel only programming is needed with the statewide DTRS, but for EDACS systems like Aurora, Denver and Lakewood etc all frequencies need to be programmed.

Welcome to the list and join us Sunday 19th for the scanner meeting if you can.

Jim<