I think my 996XT took a crap. It will not decode any audio from the Douglas county simulcast. The DATA will flash on the screen and the signal meter will go from full scale to nothing, both happen within a second. It is not a 800Mhz, trunking or digital issue. The scanner works fine on Sarpy's system decodes Cass's P25 and OPPD's control channels are strong with no drop out. I did drive to Washington county tonight to see if the problem only happens on Douglas county's sites. Unfortunately that same happens with Washington county. The scanner worked fine until Wednesday. The scanner did work fine after the firmware update to display the RID.
It's not a programming issue. I use the same file with my 396XT and that works fine.
So does anyone have any ideas?
It's not a programming issue. I use the same file with my 396XT and that works fine.
So does anyone have any ideas?