996xt , Freescan and Com speed

[JohnDistai]

Hi. I am working on loading a bunch of information from Freescan into my 996XT. During the upload process I am receiving a lot of errors. The errors state something to the effect of "insufficient memory" or "unable to write". I am wondering if this has to do with my Com port speed.

I am using the serial port to the scanner, and when I do the Auto Detect using Freescan, it sets the speed at its highest setting 115200. I would like to try a slower speed setting to see if this reduces the errors, but Freescan will not run a test or connect at a lower speed. Any ideas on how I can reduce the speed to hopefully reduce the error rate?

Oh, I'm also using Windows Vista.

Thanks!

 

[cpuerror]

It sounds like you are running out of memory on your scanner, thus getting out of memory errors. You might also be exceeding the 500TGID/system limit. For the baud rate, you need to tell the scanner to go to a lower rate as it needs to be at the same speed as FreeSCAN. The instructions that come with the scanner explain how to do that.