996XT Newbie HELP!!!

Status
Not open for further replies.

MTroxtell77

Member
Premium Subscriber
Joined
Jul 23, 2014
Messages
3
Location
Agra, OK
I just purchased a 996xt. Installed Freescan and clear the memory and loaded only the Oklahoma Freqs I wanted. All fine until I hit scan and it goes through all the ones I loaded, then the screen say -1 at top and it starts scanning from 25mhz and going up goes all the way through 900mhz and starts back at 25mhz never goes back to the channels I entered. I have looked through the easier to read manual but cant find anyting. I have resent the programming to it several time, each time telling it to clear scanner first. Any Help would be great.
 

UPMan

In Memoriam
Premium Subscriber
Joined
Apr 19, 2004
Messages
13,296
Location
Arlington, TX
Sounds like you have a custom search enabled. While it is in that search, press F+L/O, L/O to lock it out.
 

MTroxtell77

Member
Premium Subscriber
Joined
Jul 23, 2014
Messages
3
Location
Agra, OK
Ok that worked just had to do it several times. Had to lockout lower freq, then it went to next set and I locked them out and so on and so on til they were all locked out. Thank You!!!!!
 
Status
Not open for further replies.
Top