Accessing MARCS-IP Problems

[claman5]

I am trying to assist my nephew accessing the Cuyahoga area on his Harris P7200 radio for areas that use the Marcs-ip system. I have the following set: NAC is 348, RFSS ID is set 2, Site ID is 1. I also have the following setting for the WA Network -- MARCS-IP WACN is bee00 and System/Region is 5a1. He wants to listen to the Westlake area and a few others that use MARCS-IP. Was looking for help with letting me know why we are unable to hear anything on the radio. Any assistance is appreciated

 

[jdolina]

I am guessing you are programming the cuyahoga site. The nac is 340

https://www.radioreference.com/apps/db/?siteId=16773

 

[claman5]

Yes, that is the site. I tried 340 as the NAC and still no success. I am in the Ohio area right now while I am trying this.

 

[Pezking]

Put down the programming software. You have no business using it.


Sent from my iPhone using Tapatalk

 

[jdolina]

I believe system region should be 348

 

[claman5]

Thanks -- I also tried that but it said I didn't have permissions. I was told there is a work around but haven't found it. I appreciate your help

 

[wa8pyr]

All,

We do not permit discussion regarding illicit programming of commercial radios. If you or your nephew are an authorized user, contact your local communications administrator for the proper permissions and radio ID to utilize the system. Otherwise, you could seriously endanger a legitimate user.