ACR300 and PSR 300 Programming Question

[TimHSV]

Hello All,

Well being "green" with my new PSR-300 and using ARC 300 Butel sofware, I have already made an error in my downloading the wrong frequencies to my 0 Bank and 1 Bank slots; I had done a "conventional" download instead of I guess the "state" and "county" slections. I'm not real sure yet of my usage of this software either.

What should I/could I do to erase all those freqs. in Bank 0 and Bank 1 so that I can clean out and do a "cleaner' download of my county's freqs. and start off right! I would appreciate any help in this programmiing matter

I live in Huntsville, Al. in Madison County...


Thanks...Tim

 

[Steve]

Tim, what exactly do you want to listen to? Are you wanting to hear Madison County agencies and Huntsville agencies? I have both the PSR300 and ARC300, just advise what you want to listen to and I will set-up a "starter" ARC file for you. And for there you can look the file over and we can make any adjustment to it. You can PM me here or e-mail me at tayl91@bellsouth.net or kd4lcy@bellsouth.net with your details.

 

[TimHSV]

Tim, what exactly do you want to listen to? Are you wanting to hear Madison County agencies and Huntsville agencies? I have both the PSR300 and ARC300, just advise what you want to listen to and I will set-up a "starter" ARC file for you. And for there you can look the file over and we can make any adjustment to it. You can PM me here or e-mail me at tayl91@bellsouth.net or kd4lcy@bellsouth.net with your details.

Steve that would so GREAT of you if you would be able to do that for me! I would so much appreciate this; What I need Steve is all the following:

City of Huntsville- All of the Police/Fire/EMA/Utilities, since I am an Emergency Electricl disptacher.
City of Madison- Police/Fire
Madison County- Sherriff/County Fire/911 Center/State Troopers Post and Units/
Misc.- Military air/police/Search and Rescue/ Crae Flight/Airport authority, tower, air traffic/Ham 2m-SKYWARN.


Hope this is not too much Steve Thanks again so much for your help and input!!!

Also how would I get delete the data that is already in the first 2 banks btw ?


Thanks...Tim

 

[Butelsoftware]

If there is data in the other banks that you want to keep, first read the data from the scanner into the software, then in bank 0/1 select the frequencies and use the delete button to erase them. Then import the new freqs and send the data back to the scanner.

Gommert
www.butelsoftware.com

 

[TimHSV]

If there is data in the other banks that you want to keep, first read the data from the scanner into the software, then in bank 0/1 select the frequencies and use the delete button to erase them. Then import the new freqs and send the data back to the scanner.

Gommert
www.butelsoftware.com

Ahhh...Thank you very much for that info!!


Tim