• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Additional Microphone & Speaker CDM Series?

Status
Not open for further replies.

paramedszaf

Member
Joined
May 4, 2008
Messages
8
Reaction score
0
Location
Kingston, Pa - Luzerne Co.
New chiefs car is coming equiped with a CDM series VHF radio in the passenger compartment. I know the Dual-head kits are no longer made by the aftermarket distributer.. Is there a way to run and additional microphone & speaker to the cargo / command area of the vehicle?
 

DPapay

Member
Joined
Jul 5, 2007
Messages
351
Reaction score
1
Location
Morris County, N.J.
Easy to do, the CDM 16 pin accessory plug on the back is similar to the radius mobile line.
External Speaker, 1 and 16.
Mic, 2
PTT,3
Ground,7
 

paramedszaf

Member
Joined
May 4, 2008
Messages
8
Reaction score
0
Location
Kingston, Pa - Luzerne Co.
Anyone know where to find a schematic to do this operation?

2 external speakers, and additional MIC and ignition sensing connection...

I know I have see it does with networking cable but haven't seen how it all comes together...
 
Status
Not open for further replies.
Top