does anybody know when Alamance County is switching over to VIPER?
Alamance County VIPER
- Thread starter p3nt4g0n
- Start date
- Status
If i remember correctly i think its sometime this year.
If im wrong than someone please post the correct date.
If im wrong than someone please post the correct date.
dow35
Member
anyone know the control channel for the two viper towers in caswell co?
I think you have asked this question several times. If no member has responded then apprantley they do not have the information to pass on.
Have you tried doing a search fron 868-869. That is where most of CC's are found for the VIPER Towers. Also if you look at the posting in the VIPER Thread Mithch has advised that Yanceyville is up and running with a CC of 868.975 and Caswell Ems has been heard using that control channel.
Let me make a suggestion to you, go ahead and put in all VIPER Control Channels in because if you look in the Database most Control Channels are shared throughout the State.
dow35
Member
thats why its called freedom of speech men died for that right
What does that have anything to do with what we are discussing. I was just making a simple observation and letting you know apparentley we do not have the information to pass on right now.
I was also making you aware that another member was monitoring Caswell Comms with that control channel and to see if it would help you.
First off!
Go to the Viper Section of the Database under North Carolina
Scroll down and you will see just about all the active Viper Sites listed
It maybe a little Out-Dated, but Marshall does a darn good job of trying to keep it updated.
MY HATS OFF TO HIM
No offense Greg, does a good job as well.
Anyway, look for the Altmawhaw Site and the Cane Mtn. Site. Both are covering Alamance County
Look at the frequencies and the ones that are highlighted in Red should be the Primary Control Channel and the Blue should be the Secondary Control Channel.
The same is true for the Yanceyville Site in Caswell County as well.
I was told there are 64 Control Channels for Viper across the State. I was also advised this number would drop to 32 Control Channels once the rebanding has been complete.
Just my thoughts
David
Go to the Viper Section of the Database under North Carolina
Scroll down and you will see just about all the active Viper Sites listed
It maybe a little Out-Dated, but Marshall does a darn good job of trying to keep it updated.
MY HATS OFF TO HIM
No offense Greg, does a good job as well.
Anyway, look for the Altmawhaw Site and the Cane Mtn. Site. Both are covering Alamance County
Look at the frequencies and the ones that are highlighted in Red should be the Primary Control Channel and the Blue should be the Secondary Control Channel.
The same is true for the Yanceyville Site in Caswell County as well.
I was told there are 64 Control Channels for Viper across the State. I was also advised this number would drop to 32 Control Channels once the rebanding has been complete.
Just my thoughts
David
Thanks to some hard work behind the scenes by some devoted
members I am working on updating ALL of the VIPER sites statewide.
I hope to be able to work throughout the week and get the process finished
over the weekend.
Stay tuned for further....
Marshall KE4ZNR
members I am working on updating ALL of the VIPER sites statewide.
I hope to be able to work throughout the week and get the process finished
over the weekend.
Stay tuned for further....
Marshall KE4ZNR
bobilly214
Member
Date we were told last night is July 1st.
C138NC
Tactical Taco Consumer
Im pretty sure this weekend the VIPER system will be a little chatty for the parade this weekend in graham so, keep an ear out, might be interesting
- Status