• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Antenna Connector Type

Status
Not open for further replies.

ryanpape

Member
Joined
Dec 14, 2002
Messages
20
Location
San Antonio, TX
Does anyone know what type of connector is used for the antennas on LPE or Jaguard MACOM radios? I need to attach one or both to an external antenna and cannot find suitable adapters.
 

jungle

Member
Joined
Feb 10, 2002
Messages
39
Try TESSCO at one time they had adapter that would fit. Item# 51604. It says that this is for Motorola models but I have been told that it would fit the LPE200
 

JohnWayne

Member
Joined
Apr 15, 2004
Messages
242
Location
Lynchburg, VA
The LPE, Jaguar, and most other M/ACom radios use a M7x.10 threaded connector. You may also see this connector referred to as an "MD" connector. The only place I have ever seen the proper M7x1.0 to BNC adapters is from M/ACom or one of its dealers. I don't have the part number handy, but they should know what you are talking about. I think the price on them was around $40 each last time I ordered some.

Jeff
 
Status
Not open for further replies.
Top