Anytone Anytone D878UVII Plus question

[hagensieker]

Can someone confirm the hardware version of the D878UVII Plus? I think new ones are version 2 however I bought one that is labelled as the D878VUII Plus but reports as hardware version 1.10. Latest firmware is installed. 3.03

Are there older hardware versions of this same radio?

 

[rf_patriot200]

Can someone confirm the hardware version of the D878UVII Plus? I think new ones are version 2 however I bought one that is labelled as the D878VUII Plus but reports as hardware version 1.10. Latest firmware is installed. 3.03

Are there older hardware versions of this same radio?

To see all the hardware and Firmware updates on Anytone 878 or 578 radios, check bridgecomsytems.com/support there you'll find what you need.

 

[morfis]

Whether BridgeCom Systems website has the answers you seek I am not sure but the correct link is : Help Center

I thought the Model 2 is the 878UVII (and the upgraded 'plus' variant of that) and the Model 1 is the original 878UV

For the 878UVII Plus hardware version is 1.10 and latest firmware 3.03 so it would seem your example is current.

 

[rf_patriot200]

Whether BridgeCom Systems website has the answers you seek I am not sure but the correct link is : Help Center

I thought the Model 2 is the 878UVII (and the upgraded 'plus' variant of that) and the Model 1 is the original 878UV

For the 878UVII Plus hardware version is 1.10 and latest firmware 3.03 so it would seem your example is current.

Bridgecomsystems.com still shows support at the header, and still shows the links to the Cps for the 578/878. I was just there yesterday, to deal with a firmware update.

 

[hagensieker]

Whether BridgeCom Systems website has the answers you seek I am not sure but the correct link is : Help Center

I thought the Model 2 is the 878UVII (and the upgraded 'plus' variant of that) and the Model 1 is the original 878UV

For the 878UVII Plus hardware version is 1.10 and latest firmware 3.03 so it would seem your example is current.

I bought a radio advertised as a UVII Plus but it has a blue button and the hardware version reported on the radio is 1.10. 99% sure that is the 200,000 contact list version with 1GB of storage. Was just hoping someone would check their radio settings and tell me what their UVII Plus hardware version (not firmware version) is.

 

[rf_patriot200]

I bought a radio advertised as a UVII Plus but it has a blue button and the hardware version reported on the radio is 1.10. 99% sure that is the 200,000 contact list version with 1GB of storage. Was just hoping someone would check their radio settings and tell me what their UVII Plus hardware version (not firmware version) is.

AnyTone AT-D878UVII PLUS- CPS V3.03 & Firmware V3.03 is what's on mine .

 

[hagensieker]

AnyTone AT-D878UVII PLUS- CPS V3.03 & Firmware V3.03 is what's on mine.

Mine too. There is a hardware version specified though.

 

[hagensieker]

Example

 

[dickie757]

I bought a radio advertised as a UVII Plus but it has a blue button and the hardware version reported on the radio is 1.10. 99% sure that is the 200,000 contact list version with 1GB of storage. Was just hoping someone would check their radio settings and tell me what their UVII Plus hardware version (not firmware version) is.

Review D878UV - Miklor

Review D878UV- Miklor

www.miklor.com

I will look at my blue button 878 later, and look at email to confirm model shipped to me. I got mine from CSI about 4 years ago. Mine has bluetooth PTT and is bt headset capable.

On a separate note, my mmdvm STM32-dvm is arriving today.

 

[dickie757]

I think you are good. My radio is the UV Plus version that has HW ver 1.0, where your UVII Plus has 1.1

 

[hagensieker]

I think you are good. My radio is the UV Plus version that has HW ver 1.0, where your UVII Plus has 1.1

Thanks for that. How old is it?

 

[dickie757]

I could not find the email, but purchased Oct'ish 2020.

 

[hagensieker]

I could not find the email, but purchased Oct'ish 2020.

Thanks again. One more question. Does yours have the 500,000 contacts (2GB) memory?

 

[dickie757]

Nope. Only 200k

 

[richallcorn]

I purchased the AnyTone AT-878 UVII Plus last year and only this year finally got it programmed for digital use and operating perfectly! I have thoroughly enjoyed it and it's many many features ... until today.
Today, after powering up, when I press the SCAN button, or change Scan Modes to something else, I get the following error, which I cannot find "anywhere"!!!

"Book empty!"

 

[chief21]

I get the following error, which I cannot find "anywhere"!!!

"Book empty!"

I've never encountered this error but I would guess that it's not seeing a scan list. Check the CPS to be sure that the "error" channel has a specified (and populated) scan list.

 

[richallcorn]

I actually put it back to factory and then loaded the code plug again ... same issue. The problem seems to be in the UP/DOWN SCAN LIST option button. When pressed, the issue occurs, or sometimes goes away. The problem is in that button. I sent it off today on an RMA and they are going to fix it/replace it.

I had no idea I would miss it that much ... LOL
Thanks for the ideas ...

-rich-

 

[Machria]

My hardware Vers says: 1.10(GD) Anyone else have the “(GD)?

 

[dickie757]

My hardware Vers says: 1.10(GD) Anyone else have the “(GD)?

Mine is 1.00(GD) earlier version

 

[Machria]

Mine is 1.00(GD) earlier version

I wonder what the GD is?