AOR 3000A Keyboard locked after Reset

Status
Not open for further replies.

DLKE

Newbie
Joined
Jan 13, 2010
Messages
3
Location
Near Cologne
I've got an used AOR 3000A scanner.
After first powerd on the display showed garbeld digits. But i could make entries over the keyboard, also
the main tuning knob worked. The cmos battery was empty. After a replace and reset the displays showed
all entries clear and comming back with 80.000 khz. But i can not make any entries or change frequency
via main tuning knob. But the memory reset with button 3&6 before power on works fine. So i think this indicates
that the keyboard is working, but "locked" after memory or full reset.
Has anyone an idea to "unlock" it ?
 

dkf435

Member
Joined
Apr 15, 2006
Messages
707
Location
Sweet Home/Foster OR
Take bottom of radio and push reset button on back of ther CPU/keyboard assembly again. Sometimes it takes more than once to do it.

David Kb7uns
 

DLKE

Newbie
Joined
Jan 13, 2010
Messages
3
Location
Near Cologne
AOR 3000 keyboard "malefunction"

Ok, thanks for the hints - in the meantime i found the simple solution: without my own doing the backside
switch for remote operation was changend.... And reset was doing what it is for. So now the AOR works fine.

73
Juergen
 

dkf435

Member
Joined
Apr 15, 2006
Messages
707
Location
Sweet Home/Foster OR
Forgot about the remote switch on the back, on the AR3000 it went into remote mode when the computer cable was connected, the A model changed over to the switch.

David Kb7uns
 
Status
Not open for further replies.
Top