• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APCO 25 digital used much / going to be used much?

Status
Not open for further replies.

matador

Member
Joined
Nov 29, 2004
Messages
12
Reaction score
0
Wondering whether to get the BC296D or the BC250D. I notice the 296 comes with the card installed and with Truck Tracker IV (gets the 9600 baud) while the 250 does not have the card and comes with Trunk Tracker III (can not get the 9600 baud).

Any opinions on the importance of the 9600 baud?

Thanks,

M
 

INDY72

Monitoring since 1982, using radios since 1991.
Premium Subscriber
Joined
Dec 18, 2002
Messages
15,144
Reaction score
1,968
Location
Indianapolis, IN
The NEWEST (Non M/A-Com) digital TRS systems put out by Motorola are called ASTRO-25 and are 9600 KBPS baud rate.... The PRO-96, and the BC pair (296D/796D) are already prepared for these systems... they are the future in that they are fully APCO P-25 compliant (not to mention the 250D is officially discontinued)

All the up and comming 700 MHz Trunked Systems will be APCO P-25 compliant, thus 9600. Most of the digital systems comming online now in VHF, UHF, and 800 will be APCO P-25 compliant, with a few on the 3600 CC's............

The only downside is if your in an area that is installing EDACS Provoice digital systems, as no scanner made will do this type of system.
 
Status
Not open for further replies.
Top