-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
APX radio question
- Thread starter Baker845
- Start date
- Status
TheWarlock
Member
If you can't make any changes its because you have not added the system keys.
lacoscannerguy
Member
- Joined
- Aug 9, 2016
- Messages
- 80
Wow. So many questions.
1) Do you have a trunked system programmed into the radio?
2) Does the trunked system match the trunked personality?
3) Are any fields red?
4) Check your "invalid fields report".
5) Is your radio flashed to allow for the trunking system?
6) Where are you looking at your talkgroups? Under the trunking personality? (some have confused the trunking hot list as the talkgroup entry)
BE CAREFUL! I'm guessing you're trying the old "hidden talkgroup" method and if you make a wrong move, you'll end up validating with the system. Make sure you follow the instructions to an absolutely T.
Under Trunking Configuration/Trunking System/General, does System Key Present say True?
- Status
